Televes Televes
Televes
Language: en | fr | de | it | pl | pt | ru | es
Televes
Televes
Televes
Televes

Avant9 Pro SAT (FM-VHF-MATV-UHF-UHF-UHF-FI)

Ref. 532031

Additional Infomation
Pictures: 
Technical manuals: 
Software y Firmware: 
Televés reserves the right to modify the product.The product may be different than shown in the picture.

More information:

ASuite software. Program the Avant 9 in an easy and intuitive way

asuite.televes.com


 

The Avant 9 unit is a programmable multiband amplifier, which main mission is to achieve a programmable amplification and balance of different RF input signals.

  • UHF inputs: the channels present in these inputs can be filtered and adjusted using up to 10 filters. Each filter can be tuned on any of UHF channel (21 to 60) and its bandwidth can contain up to 7 channels.
    The disposition of these 10 filters is configurable based on the number of channels present on each UHF input. The output level is programmable between
    100 and 115dBµV for one-output options (BASIC and PRO), and between 96 and 111dBµV for two-output options (BASIC SAT and PRO SAT). Furthermore, an equalization slope of up to 5 dB can be programmed at the output.
  • You can choose whether to enable an FM input or not. Should this input be enabled, it will be amplified and its output level set to 10dB below the lowest-level UHF channel (taking into account the equalization slope).
  • VHF input: a VHF input can also be enabled. But in this case, its signal level will be 3 dB below the lowest-level UHF channel.
  • IF input: satellite input can be assigned an attenuation between 0 and 30dB, and an equalization between 0 and 15dB. The LNB can be configured to be REMOTELY (user STB) or LOCALLY powered by enabling the 22kHz tone and configuring the supply voltage value to 13V or 17V.

MAIN CHARACTERISTICS:

  • Output signal automatic adjustment
  • High output power
  • Multiple channel / inputs combinations
  • Up to 10 programmable filters from 1 to 7 channels
  • High adjacent channel rejection (>30dB)
  • Two power supply modes on the SAT input: local or remote
  • Led displays show both unit and signal status

IT STANDS OUT FOR:

  • Configuration and adjustment using ASuite application for Android or Windows
  • Zamak chassis providing high shielding effectiveness
  • The product range consists of four references
  • New size, more compact and light-weight
  • PRO versions include three new functions:
    • Self-installation: channel search and self-adjustment
    • Signal level and SNR (Signal to Noise Ratio) monitoring
    • Installation report generating (PDF file)
  • Energy-efficient thanks to its low power consumption: up to 25% lower than previous models
  • Easy-to-replace power supply

CONFIGURATION OPTIONS

Three programming options are available for the multiband amplifier:

App ASuite for PC or tablet / Android smartphone, via USB connection (OTG cable included): The multiband amplifier configuration is performed in a friendly and intuitive environment. A configuration can be defined and stored, even when not connected to the multiband amplifier; this configuration can be retrieved later for installation and adjustment. Furthermore, for PRO versions, the application allows the monitoring of channel quality parameters and the production of an installation report that includes the configuration applied.

Universal programmer (ref. 7234): The unit is compatible with the programmer, ensuring backwards compatibility.

 

Automatic programming by means of the "AUTO-PROGRAMMING" button (press and hold) of the multiband amplifier itself:Thanks to a tuner that is able to detect DVB-T channels for UHF and VHF inputs, the unit performs an automatic programming of the filters when executing this option, as well as the appropriate tuning to avoid intermodulation.

By pressing the READJUST button (short press), the unit readjusts to the stored configuration values.
Once tuned, a manual fine tuning on the multiband amplifier to slightly adjust the UHF, VHF and FM filters' gain.

 AVANT 9
Inputs UHF1. UHF2. UHF3 (*) BIII / DAB 120 - 862 MHz FM FI SAT (**)
Band MHz 470 - 790 174 - 260 VHF UHF 87 - 108 50 - 2150
Maximum gain dB 55(BASIC)
/ 51(PRO)
49 (BASIC)
/ 45 (PRO)
40 (BASIC)
/ 36 (PRO)
41 (BASIC)
/ 37 (PRO)
34 (BASIC)
/ 30 (PRO)
45
Filter configuration No. 10 0 0 - - - - -
9 0 1 - - - - -
8 0 2 - - - - -
7 3 0 - - - - -
7 2 1 - - - - -
7 1 2 - - - - -
6 4 0 - - - - -
6 3 1 - - - - -
6 2 2 - - - - -
5 5 0 - - - - -
5 4 1 - - - - -
5 3 2 - - - - -
Number of channels per filter No. 0 - 7 - - - - -
Slope dB 0 - 5 - - - - 0 - 15
Optimum input margin dBµV 60 - 105 63 - 88 72 74 71 - 96 65 - 95
Gain regulation dB 0 - 20 0 - 25/OFF - - 0 - 25/OFF 0 - 30
Manual regulation dB ±5 per filter ±5 - - ±5 -
Output level (DIN45004B) dBµV 122 (BASIC) / 118 (PRO) 122 (BASIC) / 118 (PRO) 122 (BASIC) / 118 (PRO) 122 (BASIC) / 118 (PRO) -
Output level (EN50083 IMD3 2CH -36dB) dBµV 126 (BASIC) / 122 (PRO) 126 (BASIC) / 122 (PRO) 126 (BASIC) / 122 (PRO) 126 (BASIC) / 122 (PRO) 123
Programmable output levels dBµV 100 - 115 (BASIC) / 96 - 111 (PRO) 97 - 112 (BASIC) / 93 - 108 (PRO) 97 - 112 (BASIC) / 93 - 108 (PRO) 100 - 115 (BASIC) / 96 - 111 (PRO) 90 - 105 (BASIC) / 86 - 101 (PRO) -
TEST output dB -20
Noise figure dB 10 10 - - 10 9
Rejection dB >30 (±16MHz) >20 (470MHz) - - >20 (±20MHz) >40 (87 - 862 MHz)
Power supply inputs VDC 12 (AUTO/ON/OFF) - - - - 13/17 (22kHz / 0kHz)
Maximum current per input mA 50 (auto) - - - - 400 (remote) / 200 (local)
Voltage / RED frequency Vac / Hz 196 - 254 / 50 - 60
Maximum power W 18,3 (ref.532031) / 11,4 (ref.532021) / 17,4 (ref.532011) / 10,4 (ref.532001)
Maximum operating temperature oC 45
Weight g 1620
Dimensions mm 273 x 203 x 57
Protection index IP 20

(*) PRO versions only
(**) SAT version only 

Additional Infomation
Pictures: 
Technical manuals: 
Software y Firmware: 
Televes
Televes Televes