Made of zinced steel and bi-chrome coating, are supplied in two types of finishing (RPR or poliester painting). They can be installed at heights from 1 to 50,5 m.
Installation types (Mod. 180 y 360)
Fixing the lower section to the base in the proper vertical position, and then mounting the consecutive intermediate sections, which will be fixed with the corresponding guy-wire; the assembly is carried out by climbing the already placed sections and raising subsequently the section to be placed, using for it the adequate elevating tools.
First assembling the tower over the ground and raising it, once mounted, by means of a crane. This system can be used only with towers of heights lower than
If the installation of the tower is made on the roof, flat roof or other place of a building, the installer will take the necessary measures according to the indications of the architect responsible of the building, in order to know the mechanical resistance of these zones.