Televes Televes
Televes
Language: en | fr | it | pl | pt | es
Televes
Televes
Televes
Televes

Stackable Main Enclosure for F.O., Indoor (Up to 48 "SC/APC" connectors)

Ref. 233003

Additional Infomation
Pictures: 
Product release: 
Technical manuals: 
Telev├ęs reserves the right to modify the product.The product may be different than shown in the picture.
Art.Nr.: 
OSB48S

This enclosure fulfils the needs that could arise at the FTTH (Fiber to the Home) or FTTR (Fiber to the Room) facilities. It is ideal for the usual F.O Networks (buildings, resorts, hotel and tourist complex, etc), with up to 48 SC adapters. Thanks to its design, this box may be vertically stacked on top of each other and with direct interconnection between the different enclosures offering to increase the services required for each type of facility. 

It has two separate compartments with hinged doors which isolate the termination of apartment wiring (customer/subscriber) with the operator network. In the left compartment, there is a key lockable door to access the apartment wiring. This compartment has a brush grommet cable input (protects against dust) with a size of 83x31mm. In the right side, a mechanical lockable door permits the operator to manage their F.O. and at the top and bottom of this area, there is a rubber gland that allows to feed-through cable with a diameter up to 48 mm.

  • Designed to FTTH and FTTR networks and also suitable with all Televés' FTTx products
  • Separator panel with capacity up to 48 SC adapters and adhesive label stuck on the right door
  • A removable tray, in the left compartment, to hold the F.O. cables
  • Furthermore, 2 separate F.O. locking tilt cartridges (book format) to store up to 24 splices in each
  • Very comfortable for work with, thanks to the locking tilt cartridge that permits to work with the fibers on horizontal position
  • Specific place to hold the F.O. splitters on it
  • Easy to install and wall-mounted indoor (IP20)
  • Made in Europe

Included a nuts and bolts bag and other elements to install it:

  • 2 Rubber gland 05Omm (feed-through of cables) 2 Cannula for fiber fastening 8 Plastic bridles 8 Plastic cable ties 1 Velcro roll
  • 4 Stowage of splicer (12 fusions)
  • 4 Rawlplugs, 4 screws and 4 washers Label to identify the connectors
Additional Infomation
Pictures: 
Product release: 
Technical manuals: 
Televes
Televes Televes