Televes Televes
Language: en | fr | de | it | pl | pt | ru | es

T-0X Trans DVB/S2 - COFDM CI (UHF) Multiplexor

Ref. 564201

Additional Infomation
Technical manuals: 
Telev茅s reserves the right to modify the product.The product may be different than shown in the picture.

This transmodulator generates a COFDM multiplex by multiplexing services from up to 3 satellite digital transponders. These services can be extracted either from 2 different satellites (2 independent SAT IF inputs) or from 1 satellite and the input loop-through of the headend itself.

  • Adaptation of the transport stream to the requirements of the DVB-T by:
    • Inclusion of null packets (“Stuffing”) for faster scans of the receiver (STB).*
    • Total or selective deleting of services from the received Multiplexes to avoid being detected (and stored) by the receiver (STB).*
  • Edition of TS_ID to facilitate detection of programs / services in the receiver (STB).*
  • Edition of Network_ID, Original Network_ID and Cell_ID to control network IDs.
  • PID filtering, allows you to delete services not interested in a multiplex (exploiting the occupation). Very interesting feature when used with a CAM.
  • Allows you to assign an LCN (Logical Channel Number) to the services present in the output, which facilitates the management of channels in the receiver (STB).*
  • Provides information about the occupation of each service and the total occupation of the COFDM output signal, which allows optimization of distributed services.
  • Edition of S_ID, to avoid retuning of receivers (STB)* when the services of a multiplex are changed at its output.
  • Through its CI interface, and the corresponding CAM module, encrypted satellite channels become free DTT services. According to the CAM used (standard/ professional) it is possible open one or more services for free TV.


Reference 564201
 SAT INPUT SAT  Input frequency range MHz 950...2.150 Program
 Frequency steps 1 Program
 Input level dBμV 42...82  
 Loop-through losses dB ≤ 1,5  
 LNB powering Vdc 13V/17V/ OFF - 22KHz (ON/OFF) Program
 Input return losses (typ.) dB > 10 típ.  
 Input impedance Ω 75  
DVB-S  Modulation format QPSK Program
 Symbol rate Mbaud 2 - 42,5 Program
 FEC inner code Viterbi (1/2, 2/3, 3/4, 5/6, 7/8) Auto
 FEC outer code RS (188/204) Auto
Roll-Off factor % 35 Auto
DVB-S2  Modulation format QPSK / 8PSK Program
 Symbol rate Mbaud 10 - 30 Program
 FEC inner code LDPC (1/2, 1/3, 1/4, 2/3, 2/5, 3/4, 3/5, 4/5, 5/6, 8/9, 9/10) Auto
 FEC outer code BCH (Bose-Chaudhuri-Hocquenghem) Auto
 Roll-Off factor % 20, 25, 35 Auto
 DVB-C OUTPUT COFDM  Modulation (Constellation) 16, 32, 64, 128 256QAM Program
 Symbol rate Mbaud 6,9  Program
 Scrambling   DVB EN 300429 Auto
 Interleaving DVB EN 300429  Auto
 PCR correction RS(188, 204) Auto
 Roll-Off factor % 15 Auto
 PCR correction yes Auto
 Services deleting yes Program
 Network_ID yes Program
 Original Network_ID yes Program
  TS_ID yes  
 Spectrum  Normal, Inverted Program
 Channel bandwidth MHz 8,3  
RF  Output frequency  47 - 862 MHz Program
 Frequency steps KHz 250 Program
 Output level (max. typ.) dBμV > 80 ± 5 típ. Program
 Output level regulation margin dB > 15 Program
 Output loop-through losses > 1,5  
 Output return losses (typ.) ≤ 12 típ.  
 Output impedance Ω 75
 MER db > 40  
 Output modes normal, CW (Continuous Wave), OFF, NULL  Program
 GENERAL  Powering voltage Vdc 24  
 Consumption mA

520 (0 LNB / 0 CAM) 620 (0 LNB / 1 CAM)

870 (1 LNB / 1 CAM) 1120 (2 LNB / 1 CAM)

 Ingress protection IP 20  
 Dimensions (W x H x D) mm 50 x 216 x 175  


Additional Infomation
Technical manuals: 
Televes Televes