Televes Televes
Language: en | fr | it | pl | pt | ru | es

T.0X Encoder Single HDMI - COFDM/QAM + 18V PSU

Ref. 566001

Additional Infomation
Product release: 
Telev茅s reserves the right to modify the product.The product may be different than shown in the picture.

Generate High Definition DTT channels

  • Real HD: original source not downscaled
  • Configurable DVB-T or DVB-C output
  • Energy efficient due to its low power consumption

Perfect synchronisation between audio & video

The single enconder/modulator ref. 566001 generates a digital multiplex from one audio/video source.

The input source may come from three different formats: composite CVBS,  YPbPr video and HDMI.

The main parametres of the output signal can be configured: the video codecs, the LCN or the mode of the output modulation.

The digital multiplex can be also configured either as DVB-T (DTT channel) or as DVB-C (QAM Annex A) to use in cable TV operator networks (CATV) in Annex A QAM format.

The configuration is carried out through a web interface built into the module, or alternatively through the universal remote control (Ref. 7234).

A power supply and a wall bracket, which enables you to wall mount the module in the absence of a rack, are also included in the kit.


  • Perfect synchronisation between audio and video
  • Configurable through a web interface
  • High output level with no need for extra amplification
  • Multi-standard output format
  • Monitorisation of the device and the signal through LEDs on the unit
  • Energy efficient due to its low power consumption


  • Compatible with many formats, resolutions and TV screen dimensions.
  • Three different input formats: (HDMI, CVBS and YPbPr).
  • Output video encoding: MPEG-2 or MPEG-4 (H.264).
  • Output modulation COFDM or QAM.
  • Integrated input RF loop through.
  • High quality output MER>40dB.
  • Two alternative installations: rack or wall (accessories included in the kit).
Reference 566001
Video   3 x RCA (Y, Pb, Pr)
1 x RCA (CVBS)
Audio   2 x RCA (L, R)
Video + Audio   1 x HDMI
Output format MPEG-2 / H264
Resolution 480i, 480p, 576i, 576p,
720p, 1080i & 1080p
Input resolution Auto-scan (1)
Aspect ratio 4:3, 16:9 & pass through
GOP   10, 12, 15, 16, 18, 20, 24 ó 30
Output format Dolby Digital AC-3 only Digital Loop) or
MPEG1 Layer2 (analogue input or HDMI PCM)
Sampling rate kHz 48
Frequency bands MHz 46...862
Maximum output level dBµV 115 (103 with active loop-through)
MER  dB >40
Spurious dBc -60
QAM Modulation 16, 32, 64, 128, 256
BaudRate Mbaud 6,9
Roll-off % 15
Code Reed Solomon
Spectrum mode Normal / Inverted
Frequency steps kHz 250
COFDM Modulation QPSK, 16QAM, 64QAM
Guard interval µS 1/4, 1/8, 1/16, 1/32
FEC  1/2, 2/3, 3/4, 5/6, 7/8
Bandwidth MHz 6, 7, 8
Cell_id  Editable
Frequency steps kHz 125 / 166
PSI Transport Stream ID  Editable
Original Network ID  Editable
Network ID  Editable
LCN  Editable
NIT  Manual / Automatic
SDT  Manual / Automatic
Tipo LCN  Generic / UK / NorDig V1 / NorDig V2
Network Name  Editable
Service PID  Editable
Service Name  Editable
Service ID  Editable
Voltage Vdc 12 ... 24
Consumption W <16
Protection Index IP 20
Working temperature ºC / ºF 0 ... 45 / 32 ... 113
Dimensions (W x H x D) mm 50 x 216 x 180
in. 1,97 x 8,50 x 7,09

 (1) The output resolution is the same as the input resolution (signal source)

Additional Infomation
Product release: 
Televes Televes