Televes Televes
Televes
Language: en | it | pl | pt | ru | es | en-us
Televes
Televes
Televes
Televes

CoaxData Gateway, ref.769301

Wed, 23/12/2015
Titulo: 
Coaxdata como maestro en las redes coaxial y datos (router ethernet)

CoaxData Gateway ref.769301 as a Master in the coaxial and data networks
(Ethernet router)

 

Starting on firmware version 1.0.0.0050 the CoaxData Gateway ref.769301 can be configured as a conventional router that acquires connection to the WAN through an Ethernet port (LAN / WAN) instead of the coaxial port (eth0).

To simplify the deploying of this architecture, there is a configuration file (mib_20150930_wan_eth.db) that can be loaded into the device (MANAGEMENT> DEVICE MANAGEMENT> LOAD CONFIGURATION).

After loading the configuration, the device will work as follows:

  • WAN input with a DHCP client, for connection to a main router via LAN / WAN port.
  • LAN outputs with a DHCP server: LAN1, LAN2, Coaxial Port eth0 and WiFi ath0.
  • Works as a master that extends the LAN network through the coaxial network and the data network (UTP / FTP).
  • It has a configuration interface via a VAP called "config" and IP 10.0.0.1/8. This VAP allows access to the configuration interface regardless of any variation on the internal configuration of the router.
  • This access is also available via LAN1 or LAN2 through the default gateway address (172.16.0.1/24.).

The diagram bellow shows the internal architecture after loading the configuration:

 

The module operating as a master must be configured as follows, using the CoaxManager

 

It is also recommended to disable the MAC learning function:

 

As both master and slaves have the same default IP address in the router (172.16.0.1/24), the IP address must be changed in the master.

Even when the IP address is changed, there is always the 10.0.0.1/8 option to access the web configuration interface.

 

Finally, check that in the "Interface Name" field figures the "Bridge: br-wan" option:

Televes
Televes Televes