The prestige and reliability of the Televes broadband amplifiers is an added value to the excellence of this range of products Televes has gone a step further on the design and manufacturing of amplifiers.
Designed with the latest technology in broadband devices, the DTKom amplifiers stand out for their technical specifications and their easy installation and adjustment
Their main features are:
input signal detector in each band in order to help the installer to detect possible failures in the signal transmission from the reception system.
Return channel at 30 and 65 MHz active or passive By means of a switch it is possible to choose whether the treatment of these signals must be active or passive a
owing to adapt them to the characteristics of the distribution network
External accessibility of the adjustments and configurations Switches and eve potentiometers are accessible from the outside The diagram printed on the front of the amplifier clear y explains how to configure the different settings of the product
The "High / Low" gain is selectable and allows the adjustment of the output level without using signal regulators (internal input attenuators) and therefore without degrading the C/N
The DTKom range is presented in two technological groups:
The POWER DOUBLING range a lows to get output levels up to 129dBuV in VHF and UHF bands and above 120dBuV with the possibility of equalization in SAT ( F) band
it is also possible to choose (switch) having two outputs with a maximum eve of 123dBuV in the VHF and UHF bands
The PUSH-PULL range a lows to get output eve s up to 123dBuV in VHF and UHF bands and above 120dBuV with the possibility of equalization in SAT ( F) band
Functionally, the DTKom series, with a wide range of products from head-end multi-input amplifiers to line-amplifiers , covers any need for any TV distribution network