I have two domestic receivers, refs. 7255 and 7245, that receive the satellite signals from Astra and Hotbird via a switch, reference 7260:
- Each receiver works correctly when the signal from the 7260 is connected independently to it.
- However, when the analogue receiver is looped-through to the digital receiver (LNB out connector to the LNB in), the analogue receiver cannot receive one of the two satellites.
(Digital receiver 7255 is in Standby mode)
- The origin of the problem could be the version that you have of reference 7245.
The external loop should work properly since both receivers are OK when the signal is connected independently to them.
- Please try using the switch, reference 7268, instead of reference 7260.