A hyperband TV channel is required in a Star series modulator ref. 7205.
The problem is that the configuration table attached to the Star leaflet has only got channel codes related to BIII and Low/High S bands.
What should I do to obtain the Hyperband TV channels?
To select a Hyperband TV channel, the modulator must be set so that it indicates the output frequencies instead of the TV channel number.
This is done by programming the switches to the video carrier frequency of the desired TV output channel.
The rotatory switches on the front panel of the Star unit should be set to the value of the video carrier of the desired TV channel.
All selected frequencies are set, by default, with 0.25 MHz as the decimal part.
Should you require any other decimal part you must open the unit and select the appropriate code using jumpers U5/U6.