Is it possible to download one mobile RST500 programming unit, ref. 7244, onto another, thereby avoiding the programming process in the second one?
-->Yes it is.
To do so you must follow the following steps:
- Activate the communications menu: switch the receivers off by pressing the Standby button. Press the and buttons on the front panel of the receiver at the same time for a few seconds.
- Connect both receivers with a 21 pin SCART-to-SCART cable. the VCR connector for data reception should be used, as well as the decoder output connector of the transmitting unit .
- Select the "data link slave" option on the receiver that will receive data and the "data link master" option on the transmitting unit by pressing "enter" in both cases.
- Wait until the data transfer has finished.