Single-dwelling UHF DTT Reception, VHF and FM
Conditions: FM and VHF strong signal from one TV Transmitter; either weak UHF or strong UHF.
This DIGINOVA antenna 144111 is delivered without PSU. That is why it is included ref. 553201 in this particular installation parts list to provide power for the built-in BOSSTech device of the antenna as welI as 2 additional outputs for TV sets.
If the UHF signal were either low or too strong, just position the ON/OFF switch in ref 553201 to ON and the BOSSTech device will adjust the signal level to the right value.- In case of a reception site with good signal there is no need to activate the BOSSTech device, so you can choose between switch-off the power from the ref. 553201, or you can do it without this reference and either: connect the antenna directly to the TV set or make use of a splitter to get the numbet of outlets you desire for your installation: 2, 3 ,...
TIP Use coaxial cable PE type for outdoor installation.
INSTALLATION PARTS LIST
||DIGINOVA antenna FM/VHF/UHF
||Domestic amplifier+ PSU
||TV–R end outlet
||5232 face plate