8-output YEDFA optical amplifier with WDM 1550 nm, Po 20 dBm
Based on YEDFA (Erbium and ytterbium doped fiber) technology, it provides a high gain, a higher optical power, and a low noise factor.

Televes reserves the right to modify the product
- Equipped with WDM for the multiplexing of RF Overlay with GPON signals
- -10 dBm to +10 dBm input range
- Status LED indicators
- Optical amplification for the RF service over fiber (RF Overlay) on GPON networks
- Suitable for long distances
- SC/APC connectors
OPTICAL VĂdeo Overlay INPUT | Input optical power range | dBm | -10...+10 |
Input connector | tipo | 1x SC / APC | |
Operating wavelenght | nm | 1548...1565 | |
OPTICAL GPON INPUT | Insertion loss(1310nm & 1490 nm) | dB | <1 |
Input connector | tipo | 8 x SC/APC | |
Operating GPON wavelenght | nm | 1310±20 - 1490±20 | |
OPTICAL OUTPUT | Output optical power per port (1550nm) | dBm | 20 ± 0,5 |
Output connector | tipo | 8 x SC/APC | |
Noise figure | dB | Tip. 5 (Pin=0 dBm 1550nm). Máx 7. | |
Optical return losses | dB | ≥ 40 | |
GENERAL | Powering | Vdc | 24 |
Máx. Consumption @ 24 Vdc | mA | 700 | |
Ingress protection level | IP | 20 |
Thanks to these measures and graphics, you will be able to know how many modules you can fit in each cabinet or frame. Televes uses standard dimensions in order to make installation easier for our technicians. These dimensions are taken from a Eurocard (standard European format for PCB). Vertically, we find the U (Unit Rack) equivalent to 1.75 inches (44.45 mm), horizontally we have the HP (Horizontal Pitch), equivalent to 0.2 inches (5.08 mm).
Below you will find the dimensions of the main modules in our headend series.
Supports and Cabinets | HP | |
5301 | 19’’ Rack frame | 84 |
567201 | 19’’ Wall support | 54 |
5072 | Lockable Cabinet 498mm | 84 |
5069 | Lockable Cabinet 648mm | 112 |
5235 | Lockable Cabinet 948mm | 168 |
Equipment dimensions’ list |
HP | |
5629 549812 |
Power Supply Unit (T.0X/T.12) | 14 |
- | T.0X (Transmodulators, CDC,... normal chassis equipment) | 10 |
- | T.12 | 7 |
5673 | T.0X Blank Plate | 10 |
507312 | T.12/T.05 Blank Plate | 7 |
Optical fibre | HP | |
234220 | T.0X EDFA | 14 |
2337 2339 |
T.0X Splitter 2D/4D | 10 |
234401 234501 234601 |
T.0X Splitter 8D/16D/32D | 18 |
234228 | T.0X EDFA 1E/8S | 22 |
-
Data sheet
DS06170412_001_ES-EN.pdf
(0.93 MB) -
AutoCAD drawing
234228 - T0X_AMPLI_1550_FO_20dBM_8S_10_Sin_[CAD07180158].dwg
(0.09 MB) -
AutoCAD drawing
234228_CAD02230201.dwg
(0.53 MB) -
Declaration of Conformity
DOC10170026_0_234228.pdf
(0.21 MB) -
Product Sheet
234228_en_US_product_sheet_PSH01231200.pdf
(0.06 MB)