The wishlist name can't be left blank

Twin Transmodulator equipped with remultiplexing

DVBT/T2 - DVBC (QAM Annex A) equipped with CI

Transmodulator generating one or two DVB-C multiplexes from the multiplexing of the services available in 2 different DVB-T or DVB-T2 muxes.

Ref. 565201
Generate PDF
EAN13: 8424450170670
SKU
565201
Highlights
  • Total or selective removal of the services present in the received transponder, to avoid them being detected (and memorized) by the receivers (STB)
  • Editable TS_ID, which makes programme/service detection easier on the receiver (STB), since the channel scan is based on this identifier
  • LCN (Logical Channel Number) allows the assignment of the services present in the output to an LCN, which makes the ordering of the channels easier on the receivers (STB)
  • Provides information regarding both the occupation of each specific service and the global output occupation, which allows the optimization of the services being distributed
  • Can be remotely controlled using CDC (Headend control)
  • Device monitoring and signal status LEDs

Main features
  • Null packet insertion (“Stuffing”) allows the receiver (STB) to perform a faster scan
  • Provides information regarding both the occupation of each specific service and the global output occupation, which allows the optimization of the services being distributed
  • Editable Network_ID, Original Network_ID and Cell_ID allow the control of network identifiers
  • S_ID editable to prevent the receivers (STB) in an installation from retuning when the output-Multiplex's services are modified
  • PID filtering allows the removal of undesired services inside a Multiplex (enhanced occupation use). Very interesting when combined with CAM use
  • DVB-T2 adaptation for television sets not equipped with a DVB-T2 tuner.

DTT INPUT
DVB-T/T2 Frequency range MHz 150...862
Frequency steps 125, 166 (Selec.)
Input level dBÎĽV -60 ... -20
Input loop-through losses dB ≤ 1,5
DVB-T Bandwidth MHz 6, 7, 8
DVB-T2 Bandwidth MHz 1.7, 5, 6, 7, 8
Input line powering for preamps Vdc 0, 12, 24 (Selec)
Input return loses dB > 10 tĂ­p.
Input impedance Ω 75
  DVB-C OUTPUT QAM QAM Modulation (Constellation) 16, 32, 64, 128, 256
Symbol rate Mbaud 1 - 7,2
Scrambling DVB ET300429
Interleaving DVB ET300429
FEC outer code RS (188, 204)
Roll-Off factor % 15
PCR Correction Yes
Services deleting Yes
Network_ID Yes
Original Network_ID Yes
Cell_ID Yes
TS_ID Yes
S_ID Yes
LCN Yes
PID Yes
Spectral inverson Normal, Inverted
Bandwidth MHz 8.3
RF Output frequency MHz 46...862
Frequency steps KHz 250
Output level (max. typ.) dBμV > 85 ± 5
Regulation margin dB > 15
Output loop-through losses dB < 1,5
Ouput return losses > 10 tĂ­p.
Output impendance
Ω 75
GENERAL Powering voltage Vdc 24
Consumption mA 450 (0 Preamp.- 0 CAM); 550 (0 Preamp. - 1 CAM)
600 (1 Preamp. - 1 CAM)
Protection index
IP 20

Block diagram