The wishlist name can't be left blank
Modulator Encoder DVBT / DVBC (QAM Annex A)

Modulator Encoder DVBT / DVBC (QAM Annex A)

Modulator Encoder DVBT or DVBC (QAM Annex A) / ITUJ83 (QAM Annex B)

Generate your own DTT content in High Definition

Home devices that provide a multi-channel bundle from the signal provided by an Audio/Video source.

Ref. 566001
Generate PDF
EAN13: 8424450180723
SKU
566001
Highlights
  • Perfect image and audio synchronization
  • Compatible with multiple formats, resolutions, and TV set sizes
  • Editing of all the modulation and encoding parameters
  • Configurable via web interface or PCT5.0 programmer
  • High output power without the need for extra amplification
  • Multi-standard output format
  • Excellent output quality (MER>40 dB)
  • Device monitoring and signal status LED diodes
  • Energy-efficient thanks to their low power consumption
  • Integrated RF combiner and Ethernet switch
  • Remote firmware update
  • Configuration via a web interface embedded in the encoder

Main features
  • Individual-rack mounting (accessories for independent installation are provided)

References 566001 566011
INPUTS VIDEO Connectors 3 x RCA (Y, Pb, Pr)
2 grupos 1 x RCA (CVBS)
2 juegos 1 x RCA (CVBS)
AUDIO Connectors 2 x RCA (L,R) 2 juegos 2 x RCA (L,R)
VIDEO + AUDIO Connectors 1 x HDMI -
ENCODING
PROFILE
VIDEO Output Format MPEG-2 / H264 MPEG-2 / H.264 (4.0, 4.1, 4.2, 5.1, 5.2)
Input Resolution 480i, 480p, 576i, 576p, 720p, 1080i & 1080p
Supports auto-scan for input resolution
480i & 576i
Supports auto-scan for input resolution
Input Framerate - 50Hz, 60Hz
Output Resolution - Same as input (Auto)
Output Aspect Ratio 4:3, 16:9 y pass through
GOP 10, 12, 15, 16, 18, 20, 24 ó 30
Output Transport rate Variable
Output Video bit rate Variable
AUDIO Output Format Dolby Digital AC-3 (only digital passthrough) or
MPEG1 Layer2 (analog input or HDMI uncompressed PCM audio)
MPEG1 Layer 2
Output Sampling rate kHz 48
Output bitrate - Variable
OUTPUT RF Connectors 1x "F" Female
Frequency Range MHz 48...862
Max output level dBμV +115 (+103 with loop-through)
MER dB >40
Spurious dBc -60
Impedance Ω 75
I/Q Phase Error ° <1
I/Q Amplitude Imbalance % <1
QAM Modulation format 16, 32, 64, 128, 256
BaudRate Mbaud 6,9 1...7,2
Roll-off % 15
Code Reed Solomon
Spectrum Mode - Normal / Inverted
Frequency Step kHz 250
COFDM Modulation format QPSK, 16QAM, 64QAM
Guard Interval μS 1/4, 1/8, 1/16, 1/32
FEC 1/2, 2/3, 3/4, 5/6, 7/8
Bandwidth MHz 6, 7, 8
Cell_id Editable
Frequency Step KHz 125 / 166
PSI PARAMETERS Transport Stream ID Editable
Original Network ID Editable
Network ID Editable
LCN Editable
NIT Manual / Automatic
SDT Manual / Automatic
Type LCN Generic / UK / NorDig V1 / NorDig V2
Network Name Editable
Service PID Editable
Service Name Editable
Service ID Editable
MONITORING / CONTROL Local control Full configuration with LCD handheld programmer
Local monitoring LOOP status LED
OUTPUT status LED
TEMP status LED
CH1 status LED CH1/CH2 status LED
Ethernet status LEDs
Remote monitoring Centralized web based remote control, management, alarms, and software upgrades
GENERAL Power supply Vdc 24 12...24
Power disipation W <14 <12
Protection index
IP 20
Operating Temperature °F/°C 32 a 113 / 0 a 45