The wishlist name can't be left blank
SMATV optical receiver equipped with Return Path transmitter

SMATV optical receiver equipped with Return Path transmitter

SMATV optical receiver without Return Path

1200...1600 nm

They receive an optical signal in the 1200 nm-1600 nm range to restore the original RF signal transformed by a transmitter.
The RF band is compatible with SMATV (87 MHz - 2400 MHz).
Perfect for RFoG / RF Overlay solutions.
Ref. 2335
Generate PDF
EAN13: 8424450147603
SKU
2335
Highlights
  • Wide reception optical range
  • Output level above 90 dBµV
  • Optical power LED indicators
  • The output band includes SAT, up to 2400 MHz
  • Optical power drop alarm

Main features
  • Perfect for RF overlay solutions
  • Very low equivalent noise conversion
  • Adjustable attenuator
  • Easy to install and use
  • High energy efficiency
  • SC/APC optical connectors, and F-type connectors for RF

RF
Input/Output
Frequency range Forward channel MHz 87 - 2400
Return channel ----
Maximum Output Level for CSO and CTB >= 60dB 87-862 MHz dBμV 93
950-2400 MHz 90
Output level regulation margin (in 2 dB steps) dB 0 - 18
Maximum input level return path dBμV ----
Equivalent input noise of the return channel, measured at 30 MHz and the
transmitter output connected directly to the receiver
dBm/Hz -152,5
Flatness dB ± 1,5
Return losses dB >= 11
Impedance ohm 75
Optical input
(forward channel)
Optical device type InGaAs Pin Photodiode
Wavelength nm 1200 -1600
Detection bandwidth MHz 1 - 3000
Maximum Optical power received mW/dBm 4 / 6
Optical output
(return channel)
Laser type ----
Wavelength nm ----
Maximum output power mW/dBm ----
General Powering/Consumption 12 Vdc mA 300
24 Vdc 155
RF connectors type F hembra
Optical connectors SC/APC
Operating temperature ºC -5 ··· +45