The wishlist name can't be left blank
SMATV optical receiver without Return Path

SMATV optical receiver without Return Path

SMATV optical receiver equipped with Return Path transmitter

1200...1600 nm, Return: 1310 nm, Po 3 dBm

They receive an optical signal in the 1200 nm-1600 nm range to restore the original RF signal transformed by a transmitter.
The RF band is compatible with SMATV (54 MHz - 2400 MHz).
Equipped with a Return Path transmitter (1 MHz - 65 MHz) in the 1310 nm range, with 3 dBm optical power.
Perfect for RFoG / RF Overlay solutions.
Ref. 2336
Generate PDF
EAN13: 8424450147610
SKU
2336
Highlights
  • Wide reception optical range
  • Output level above 90 dBµV
  • Optical power LED indicators
  • The output band includes SAT, up to 2400 MHz
  • Optical power drop alarm

Main features
  • Perfect for RF overlay solutions
  • Very low equivalent noise conversion
  • Adjustable attenuator
  • Easy to install and use
  • High energy efficiency
  • SC/APC optical connectors, and F-type connectors for RF

RF Input/Output Frequency range Forward channel MHz 87 - 2400
Return channel 1 - 65
Maximum Output Level for CSO and CTB >= 60dB 87-862 MHz dBμV/ dBmV
93 / 33
950-2400 MHz 90 / 30
Output level regulation margin (in 2 dB steps) dB 0 - 18
Maximum input level return path dBμV/ dBmV
95 / 35
Equivalent input noise of the return channel, measured at 30 MHz and the
transmitter output connected directly to the receiver
dBm/Hz -152,5
Flatness dB ± 1,5
Return losses dB >= 11
Impedance ohm 75
Optical input
(forward channel))
Optical device type InGaAs Pin Photodiode
LWavelength nm 1200 -1600
Detection bandwidth MHz 1 - 3000
Maximum Optical power received mW/dBm 4 / 6
Optical output
(return channel)
Laser type Fabry-Perot
Wavelength nm 1310 ± 20
Maximum output power mW/dBm 2 / 3
General Powering/Consumption 12 Vdc mA 355
24 Vdc 175
RF connectors type female F
Optical connectors SC/APC
Operating temperature

ºC

ºF

-5 ··· +45

+23 ... +113