The wishlist name can't be left blank
End Outlet Triplexed

End Outlet Triplexed

End Outlet

3 connectors: FM/TV-SAT1-SAT2

End outlet equipped with three connectors and two inputs. Equipped with two F connectors: SAT1 on the lower right side for the satellite signal corresponding to input 1 (filtered), and SAT2 on the top for the satellite signal corresponding to input 2 (full bandwidth 5-2400 MHz). The IEC male connector for radio (FM) and terrestrial TV from outlet's input 1, is located on the lower left side.
The lower part of the chassis is open.
Ref. 524501
Generate PDF
EAN13: 8424450188606
  • High-rejection terrestrial-satellite separation filter: the SAT signal is filtered in the FM/TV IEC connector, while the terrestrial FM/TV signal is filtered in the satellite (SAT1) F connector.
  • Robot-controlled automated manufacturing
  • High shielding
  • Outstanding isolation between outputs

Main features
  • Made of Zamak, high strength
  • DC pass from the SAT connector to the input
  • Compatible with coaxial cable with sheath diameters in the 5-to-7 mm range (Ø 5...7 mm)


Televes outlets: Screw-free mounting

A class A outlet offering numerous advantages:

  • The inner conductor is connected simply by pushing, without the need for screws; still the gripping force is equivalent
  • Supports inner conductor diameters from 0.65 mm to 1.2 mm, and external cable diameters from 5 mm to 6.9 mm
  • F-connector type conic guide for easy inner conductor introduction
  • Wide margin in inner conductor length (from 5 mm to 15 mm), which makes short circuits between core and mesh difficult
  • Tilt-up, self-supporting, full-opening clamp
  • The clamp is equipped with 3 jagged rows in 9 mm for a perfect braid fixing
  • Printed circuit board perforation to make the faceplate fixing screw compatible
  • Rounded edges to prevent cuts
  • Class A shielding

Furthermore, this product range includes several engravings on the chassis:

  • CE marking
  • Numerical and logical references
  • Input and output indications
  • Cable stripping dimensions

Band FM / TV
Connector “IEC” male “F” female “F” female
Isolation FM/TV - SAT1 dB 20 typ.
SAT1 - SAT2 30
Attenuation Out: FM/TV dB 1
Out: SAT1 1,5
Out: SAT2 1
DC Pass
Vdc / A - 40 / 0,5 50 / 1

Mounting details