The wishlist name can't be left blank

FiberKom optical mini-receiver equipped with OLC technology

1200...1600 nm

Optical mini-receiver for small MDU (Multi Dwelling Unit); receives one optical signal in the 1200 nm-1600 nm range and restores it on one RF output (47 MHz-1006 MHz) with amplification.
Equipped with OLC technology.
Perfect for RF Overlay, FTTB, and FTTH applications.
In stock
SKU
RX_FiberKom
Select your product
Grouped product items
Ref. 238101 Remote powering (F connector)
Ref. 238079 Local powering
Generate PDF
Highlights
  • The OLC (Optical Level Control) technology automatically adjusts the parameters to achieve a constant output level, irrespective of the channel load
  • Equipped with pre-equalization, attenuation, and equalization controls to adapt the output signal to the coaxial network characteristics
  • High output voltage (RF amplification) and enhanced C/N
  • Wide reception optical range
  • Low power consumption

Main features
  • SC/APC optical connectors, and F-type connectors for RF

Forward path
Frequency range MHz 47 ... 1006
Output impedance Ohm 75
Optical input level for OLC dBm -8 ... +1dBm
Flatness dB ± 1
Number of outputs no. 1
Typical output level in OLC range dBμV / dBmV 100 / 40
CNR dB >51
CSO dB >60
CTB dB >60
Equivalent noise current density at input pA/ Hz < 6
Gain control (2dB steps) dB 0... 18
Pre-emphasis dB 3, 7, 9
Wavelength nm 1200 - 1600
Optical return loss dB >40
Optical connector type SC/APC
Max. optical input power before damage dBm 2
Optical device type InGaAs pin photodiode
General
Power voltage / Max. consumption V=/mA

11 / 340.... 35 / 140 (ref. 238101)

99 / 75 ... 253 / 40 (ref. 238079)

Test point dB -30 ±1
RF connectors type F
Housing material Zamak/ABS
Operating temperature ºC / ºF -5...+45 / +23....+113
Index operation IP 30
EMC compatibility EN 50083-2
Safety EN 60825-1