The wishlist name can't be left blank

SMATV optical receiver without Return Path

1200...1600 nm

They receive an optical signal in the 1200 nm-1600 nm range to restore the original RF signal transformed by a transmitter.
The RF band is compatible with SMATV (87 MHz - 2400 MHz).
Perfect for RFoG / RF Overlay solutions.
Ref. 2335
Generate PDF
EAN13: 8424450147603
SKU
2335
Highlights
  • Wide reception optical range
  • Output level above 90 dBµV
  • Optical power LED indicators
  • The output band includes SAT, up to 2400 MHz
  • Optical power drop alarm

Main features
  • Perfect for RF overlay solutions
  • Very low equivalent noise conversion
  • Adjustable attenuator
  • Easy to install and use
  • High energy efficiency
  • SC/APC optical connectors, and F-type connectors for RF

RF
Input/Output
Frequency range Forward channel MHz 87 - 2400
Return channel ----
Maximum Output Level for CSO and CTB >= 60dB 87-862 MHz dBμV 93
950-2400 MHz 90
Output level regulation margin (in 2 dB steps) dB 0 - 18
Maximum input level return path dBμV ----
Equivalent input noise of the return channel, measured at 30 MHz and the
transmitter output connected directly to the receiver
dBm/Hz -152,5
Flatness dB ± 1,5
Return losses dB >= 11
Impedance ohm 75
Optical input
(forward channel)
Optical device type InGaAs Pin Photodiode
Wavelength nm 1200 -1600
Detection bandwidth MHz 1 - 3000
Maximum Optical power received mW/dBm 4 / 6
Optical output
(return channel)
Laser type ----
Wavelength nm ----
Maximum output power mW/dBm ----
General Powering/Consumption 12 Vdc mA 300
24 Vdc 155
RF connectors type F hembra
Optical connectors SC/APC
Operating temperature ºC -5 ··· +45