Upper section, Zinc + RCP
3m upper section for the erection of a 180 tower.
Televes reserves the right to modify the product
- Anchoring system with union nuts
- Easy and quick mounting
- Fully automated soldering
- 180 tower maximum height: 26.5m (as per calculation conditions)
- Zinc coating + RCP
- Grey finish
|Surface facing the wind||0,227 m2 x 1,2 coef. = 0,272 m2|
The most appropriate tower model depends on a series of factors: 1. The material you want to install (weight, dimensions) 2. The height at which you want to mount it. 3. The wind speed it will have to withstand. 4. The location of the tower (hill, balcony, etc.). Based on these parameters, you may have to install M180, M360, M450, or M550.
All of our towers have the shape of equilateral triangles. The name corresponds to the dimensions of the tower side (18 cm, 36 cm, 45 cm, or 55 cm).
All upper sections from Televes allow mast diameters of up to 45 mm.
No. Each tower type has a specific way of connecting sections, and they are different from one another.
It consists in fixing the lower section to the base, set it in upright position and levelling it. The subsequent Middle Sections are then mounted, equipped with the appropriate guy wires; the mounting is carried out by climbing on the previously mounted sections and hoisting the new section with the help of the appropriate lifting tools.