8-output EDFA optical amplifier, 1RU rack 19”
1550 nm, Po 10 dBm
This device consists of an amplifier and a double power supply. It amplifies a 1550nm optical signal with an output power of 10 dBm in 8 optical outputs, suitable for video distribution in medium size splitting optical networks. Based on EDFA (Erbium doped fiber) technology, it provides a high gain and a low noise factor.
Ref. 769622
EAN13:
8424450224137
SKU
769622
Televes reserves the right to modify the product
Highlights
- High-optical output power amplifier
- Application to distribute RF Overlay in optical networks
- -10 dBm to +10 dBm input range
- Status LED indicators
- High-efficiency power supply
- Hot swappable double power supply: subscriber service is not interrupted
Main features
- 1RU for rack 19’’
- Extended range (99-253 VAC) power supply
- Suitable for medium/large size optical networks
- SC/APC optical connectors
| OPTICAL | Number of ports | 1 RF Overlay @Optical IN 8 RF Overlay @Optical OUT | |
| Wavelenght | nm | 1530...1565 | |
| Input RF Overlay | dBm | -10...+10 | |
| Output power RF Overlay | dB | 8 x 10 | |
| Noise figure | dB | 5 | |
| Insertion loss (1310nm & 1490nm) | dB | - | |
| Return loss | dB | >40 | |
| C/N / CSO / CTB | dB | 51 / >65 / >65 | |
| Input/output optical connectors | SC/APC | ||
| PSU | Mains voltage | VAC | 110-230 |
| Mains frequency | Hz | 50-60 | |
| Max. input consumption | mA | 110 | |
| Maximum input power | W | 5.5 | |
| GENERAL | Operating temperature | ºC | -5...+45 |
| Protection index | IP | 20 | |
Block diagram
