The wishlist name can't be left blank
H30D+ (QAM) sprectrum analyzer with ATSC 1.0 and DOCSIS 3.1

H30D+ (QAM) sprectrum analyzer with ATSC 1.0 and DOCSIS 3.1

H30D+ FULL (QAM) sprectrum analyzer with ATSC 1.0/3.0 and DOCSIS 3.1

Ready for the NEXTGEN TV

The H30D+ is a lightweight, compact and robust equipment that includes a full range of tools and functionalities to successfully perform installation, maintenance and troubleshooting tasks in both analogue networks and digital networks with ATSC, and QAM channels. It stands out for incorporating advanced DOCSIS 3.1 measurements, automatic monitoring of the desired channel, double-check connectivity and the information about a QAM channel program content, among other powerful functions.
Operating the meter is more flexible thanks to its multiscreen system: the user can manage it remotely and display its contents on their own mobile device (Android, iOS or PC). Wi-Fi and Bluetooth connectivity will let you work with all the conveniences of a wireless connection. In addition, to make the use of the smartphone even more natural, a universal bracelet is provided for devices up to 6".
Just as the rest of the meters fully designed and manufactured in Televes Corporation, H30D+ takes advantage of the digital processing technology, and provides the user with a speed and mathematical accuracy equivalent to that of laboratory equipment.
Ref. 593985
Generate PDF
EAN13: 8424450238073
SKU
593985
Highlights
  • Professional RF signal analyzer: decoding and display of video and audio parameters of received ATSC 1.0 / 3.0 and QAM signals
  • Multiscreen system with touch control: display the meter screen on a mobile device, and control the meter by touch gestures and buttons
  • Wi-Fi and Bluetooth connectivity
  • Real-time digital processing
  • Light-weight handheld meter
  • User-friendly interface
  • DOCSIS 3.1
  • With Wi-Fi / IPTV analyzers and HEVC display available
  • Automatic parameter detection: the H30D+ automatically detects signal type (A/D) and parameters to be measured (constellation, symbol rate, etc)
  • All measurements are carried out by pressing a single button equipped with Pass/Fail indicators to reduce installation errors

H30D+
Mechanical Specifications
Screen 2.8” TFT 400 x 240 full color
Weight 633 g (1.39 lb)
Dimensions 175x100x52 mm / 6.9x3.9x2 (HxWxD)
AC Adaptor Input: 100-240 V~ 50-60 Hz Output: 12 VDC, 2 A
Battery Li-ion (7.2 VDC, 2550 mAh)
Battery range <4 hours
Interfaces Bluetooth, Wi-Fi 2.4/5 GHz, Ethernet 1 Gb, USB 2.0
Resilience It withstands drops From 1 m (3.2 ft) onto concrete on all sides
Storage capacity 400 MB (internal) for measurements
Impedance F-type connector - 75 Ohm
Technical Specifications
 Frequency 5 to 1,794 MHz
 Resolution 50 kHz
 Input Impedance 75 Ohm
 Input level 45 - 125
 Standards ITU-T J.83 Annex A/B/C standard
 Modulation 16/32/64/128/256 QAM, QPSK
 Symbol Rate 2 to 6.9 Msps
 MER 40 dB
 Digital Measurements QAM

Power
MER
C/N
PreBER (Annex B)
PostBER (Annex B)

BER (Annex A/C)
Constellation with Zoom Capability

 Digital Measurements ATSC 1.0

Power
MER
C/N
CBER
VBER
Constellation

 Digital Measurements ATSC 3.0

Power
MER
C/N
LDPCBER
BCHBER
Echoes

 Analog Measurements V/A ratio
C/N
 DOCSIS 3.1
 MPEG Service Information
 IP Speed Test
 Advanced API
 Wi-Fi and Bluetooth Connectivity
 Long Term Monitoring
 Wi-Fi Analyzer
 Services and IPTV Analizer
 HEVC display

Multiscreen and remote control

Controllable from any Android or iOS device or a PC

The H30D+ multiscreen system allows you to display the meter’s screen on your smartphone or tablet to wirelessly control the equipment, or just for the sake of working with a larger screen.
The installer may wirelessly access the equipment at any time from anywhere in the installation (depending on the local network connection range), with the convenience of always using his/her own device.

Ready for NEXTGEN TV

The best tool for ATSC 3.0 installation analysis

H30D+ provides a deep and detailed analysis of ATSC 3.0 signals. It also provides full analysis of ATSC 1.0 and QAM signals, with the ability to decode and display the video and audio parameters of received RF signals.

Wi-Fi and Bluetooth connectivity

Wireless access to the meter

Equipped with 2.4/5 GHz Wi-Fi and Bluetooth, the equipment allows secure access through an Android or iOS device, or a PC. In this way, the WEB management application may be used to query and edit channel plans or user profiles, export measurements, etc.

Rugged and Light Weight

Total reliability

A unique dual injected rubber and polycarbonate plastic housing ensures the best protection and durability. Weighing only one pound, the H30D+ is comfortable to carry and use. You can put it in your pocket or hang it from its sturdy built-in grommets using the provided shoulder strap… you will hardly know it’s there!

Intuitive User Interface

Reducing the learning curve

Easy to use one-­level menu structure with very intuitive functions for increased usability, faster operation and maximum productivity. No function requires more than three successive button pushes to achieve the desired operation. It doesn’t get any easier than this, you will fly through the functions without ever reading the user manual.

Long Battery Life

Up to 4 hours on a full charge

High quality Li-­Ion batteries, in conjunction with our advanced low power consumption technology, provide enough juice for even the largest jobs. One hour of fast charging will provide almost three hours of extended operation.

Made in Televes

Your Quality Warranty

The H30D+ is entirely designed by Gsertel, a company within Televes Corporation, where our team of experienced and highly qualified telecommunication engineers managed to integrate digital processing in a handheld unit of 1lb of weight. Each H30D+ includes more than 5,000 components and integrated circuits.

Advanced DOCSIS 3.1 Measurements

Without missing a detail

This function displays all the measurements for the DOCSIS OFDM channel. In addition to MER and level measurements, it also displays all the PLC and NCP measurements.

Services and IPTV Analyzer

IPTV and RF services information

Allows the demodulation and analysis of IPTV streams (both Unicast and Multicast), not only through video display but also by displaying the total bitrate and bitrate for each service. The relevant information for each service is already given: SID, VPID, AID, video profile, bit rate for both audio and video.
In addition, this option completes the RF measurements since all this information by service is analyzed as well for this type of signals.
For IPTV signals, specific protocol measurements (UDP/RTP) are also analyzed, such as UDP format, Media Loss Rate, Lost IP frames.

Wi-Fi Analyzer

All bands (2.4 and 5 GHz)

This functionality allows a full analysis of the Wi-Fi band for the automatic detection of all the networks. Each of them is identified by name, and the power of the signal at the access point is also displayed. Two display modes are provided for the user to choose. The “list” mode provides a list of the detected networks with the associated data and power, while the “map” mode represents them on a dual-axis map: power vs. frequency.

CMTS Synchronization Status

Synchronizing with the headend

Obtain a step-by-step indication of a pass/fail test, as the modem finds, connects, and registers to a headend (CMTS), and also obtains critical parameters in the process. Confirm that the modem first finds the downstream channel and, right after that, the upstream channel. Later obtain the configuration as the DHCP address server, TOD server time, the complete configuration file and the registration information.

Downstream and Upstream Measurements

At a glance

See a summary pass/fail view of up to 34 downstream (32 QAM + 2 OFDM) and 10 upstream channels (8 QAM + 2 OFDM) at once. Select one of the channels and see the critical measurements all on the same screen. Select from one of the factory configured or user created profiles to set the appropriate pass/fail thresholds. Get all the pertinent details at a glance for any given channel including the modulation, symbol rate, frequency, power, MER, and both the pre and post error correction Bit Error Rates.

Tilt Function

Always in balance

Get a quick view of your signal level differences over a specified frequency range, so you can apply attenuation or equalization to adjust them. Take the meter to your farthest extents and see at a glance what carriers’ power levels are out by their red, yellow, and green colors. Any number between 2–12 analog, digital or DOCSIS channels can be measured using the tilt measurement, and you can even select which carriers are your reference points to determine the tilt between any of the channels included in the measurement.

HEVC display on the meter

and also on your mobile device

This functionality supports HEVC H.265 new compression format and allows the display of video signals with a maximum Full HD resolution (1920 x 1080). Information can be displayed both on the meter screen* or on the mobile device (multiscreen mode) as long as your hardware is H.265 compatible (usually a smartphone, tablet or PC).

System Scan

Monitored installation

Scan each existing analogue and digital channel in real time to determine the overall system frequency response. This function leverages the location-based thresholds to clearly show whether the signal levels meet the cable systems’ specifications with green, yellow and red bars. This feature provides an easy-to-understand, real-time view of the system, including the BER and MER values of the selected channel.

Voltmeter & Hum

Cover all your bases

Don’t want to worry about bringing a separate volt meter with you…? No problem, the H30D+ will do that too. The H30D+ will also give you a Hum percentage to help you diagnose those ground and power interference problems that may result from a defective power supply or faulty/overloaded power inserters.

Reverse Path Ingress Scan

Maximum, average, peak

Help identify reverse path problems before your customers are affected. Poorly shielded coaxial cable and faulty terminations are important sources of ingress noise which can easily add up in the return due to the large number of subscriber-generated signals that are sent back to the headend. The combined and amplified interference is often responsible for service disruption, so having a good reverse path ingress scan tool is always a must.

IP Speed Test

Double-check connectivity

Need a quick check of your data network at the headend or at a customer’s unit? The H30D+’s IP Speed Test allows you to check your basic network performance parameters, so you don’t need to get your laptop out. This includes your upload and download speed, as well as your ping times and lost packets statistics.

Modem Emulation

Building a bridge

This function sets the H30D+ to be used as a DOCSIS modem and to use it to give to another device a connection to the DOCSIS network via the H30D+’s Ethernet port. This feature shows the connection status of the modem as well as the instantaneous speed and the size of the data sent through the modem.

Service Info

Study MPEG details

Do you want to know what program content is on that QAM channel? The H30D+’s Service Info feature will tell you. In addition to the short description of the service, you will get the important parameters including the NIT, PAT, and TSID for the channel, and for the individual service you will get the SID and the PID, encode type, resolution, and bitrate for both the audio and video, all of which greatly help when troubleshooting your encoder configuration.

LT Monitoring

Automatic monitoring of the desired channel

The H30D+ Long Term Monitoring Function allows the automatic monitoring of the selected channel. Once the time interval between two consecutive measurements has been selected, the H30D+ will automatically take all the measurements of the channel selected and store them in memory.

Throughput Test

Speedometer

This function measures the upstream and downstream rates of the DOCSIS network. The rate measurements are performed using an FTP server that must be configured by the user (URL, file, get/put, user, password). This feature shows the IP modem within the DOCSIS network and the maximum speed negotiated (DS/ US). When you start the speed test, the speed value is constantly updated.