1-output EDFA optical amplifier, 1RU rack 19"
1550 nm, Po 20 dBm
This device consists of an amplifier and a double power supply. It amplifies a 1550nm optical signal with an output power of 20 dBm in an optical output, suitable for video distribution in medium size splitting optical networks. Based on EDFA (Erbium doped fiber) technology, it provides a high gain, a higher optical power and a low noise factor.
Ref. 769620
EAN13:
8424450224120
SKU
769620
Televes reserves the right to modify the product
Highlights
- High-optical output power amplifier
- Application to distribute RF Overlay in optical networks
- -10 dBm to +10 dBm input range
- Status LED indicators
- High-efficiency power supply
- Hot swappable double power supply: subscriber service is not interrupted
Main features
- 1RU for rack 19"
- Extended range (99-253 VAC) power supply
- Suitable for medium/large size optical networks
- SC/APC optical connectors
| Number of input optical ports RF Overlay | 1 | |
|---|---|---|
| Number of output optical ports | 1 | |
| Wavelength (@RF Overlay) | nm | 1540 ... 1560 |
| Optical input power RF Overlay Min | dBm | -10 |
| Optical input power RF Overlay Max | dBm | 10 |
| Optical output power RF Overlay | dBm | 20 |
| Noise figure Max | dB | 5.5 |
| Optical return losses | dB | -40 |
| C/N | dB | 51 |
| CSO Max | dB | -65 |
| CTB Max | dB | -65 |
| Optical connectors | SC/APC | |
| Protection index | 20 | |
| Operating temperature | °F | 23 ... 113 |
| Mains frequency | 50 Hz / 60 Hz | |
| PSU input voltage | Vac | 110 ... 230 |
| Max PSU current input | mA | 110 |
| PSU input power Max | W | 5.5 |
| Notes | Measurements made with: external modulator transmitter, 40km fiber, optical input power to the receiver of -0.6dBm |
Block diagram
