The wishlist name can't be left blank
SMATV optical receiver without Return Path 1200...1600 nm

SMATV optical receiver without Return Path 1200...1600 nm

SMATV optical receiver equipped with Return Path transmitter 1200...1600 nm, Return: 1310 nm, Po 3 dBm

They receive an optical signal in the 1200 nm-1600 nm range to restore the original RF signal transformed by a transmitter.
The RF band is compatible with SMATV (87 MHz - 2400 MHz).
Equipped with a Return Path transmitter (1 MHz - 65 MHz) in the 1310 nm range, with 3 dBm optical power.
Perfect for RFoG / RF Overlay solutions.
Ref. 2336
Generate PDF
EAN13: 8424450147610
SKU
2336
Highlights
  • Wide reception optical range
  • Output level above 90 dBµV
  • Optical power LED indicators
  • The output band includes SAT, up to 2400 MHz
  • Optical power drop alarm

Main features
  • Perfect for RF overlay solutions
  • Very low equivalent noise conversion
  • Adjustable attenuator
  • Easy to install and use
  • High energy efficiency
  • SC/APC optical connectors, and F-type connectors for RF

RF Input/Output Frequency range Forward channel MHz 87 - 2400
Return channel 1 - 65
Maximum Output Level for CSO and CTB >= 60dB 87-862 MHz dBμV/ dBmV
93 / 33
950-2400 MHz 90 / 30
Output level regulation margin (in 2 dB steps) dB 0 - 18
Maximum input level return path dBμV/ dBmV
95 / 35
Equivalent input noise of the return channel, measured at 30 MHz and the
transmitter output connected directly to the receiver
dBm/Hz -152,5
Flatness dB ± 1,5
Return losses dB >= 11
Impedance ohm 75
Optical input
(forward channel))
Optical device type InGaAs Pin Photodiode
LWavelength nm 1200 -1600
Detection bandwidth MHz 1 - 3000
Maximum Optical power received mW/dBm 4 / 6
Optical output
(return channel)
Laser type Fabry-Perot
Wavelength nm 1310 ± 20
Maximum output power mW/dBm 2 / 3
General Powering/Consumption 12 Vdc mA 355
24 Vdc 175
RF connectors type female F
Optical connectors SC/APC
Operating temperature

ºC

ºF

-5 ··· +45

+23 ... +113