Upper section, Hot-Dip Galvanizing 180 tower
3 m upper section for the erection of a 180 tower.
Ref. 303201
EAN13:
8424450152218
SKU
303201
Highlights
- Anchoring system with union nuts
- Easy and quick mounting
- Fully automated soldering
- 180 tower maximum height: 26.5 m (as per calculation conditions)
Main features
- The hot-dip galvanizing surface treatment provides enhanced durability in adverse corrosion conditions
- Grey finish
- Mast max. diameter: 46 mm
Surface facing the wind | m² | 0.272 |
---|
Physical data
Net weight: 11,559 g
Gross weight: 11,559 g
Width: 225 mm
Height: 3,010 mm
Depth: 225 mm
Main product weight: 11,559 g
Packing
Unit 1 Units
tlv_reflog | TOBER180FV | |||
---|---|---|---|---|
tlv_tabla_especificaciones |
|
|||
tlv_ean | 8424450152218 | |||
tlv_dim_product_x | 225 | |||
tlv_dim_product_x_label | Width | |||
tlv_dim_product_x_unit | mm | |||
tlv_dim_product_y | 3,010 | |||
tlv_dim_product_y_label | Height | |||
tlv_dim_product_y_unit | mm | |||
tlv_dim_product_z | 225 | |||
tlv_dim_product_z_label | Depth | |||
tlv_dim_product_z_unit | mm | |||
tlv_weight_product_label | Main product weight | |||
tlv_weight_product | 11,559 | |||
tlv_weight_product_unit | g | |||
tlv_gross_weight_label | Gross weight | |||
tlv_gross_weight | 11,559 | |||
tlv_gross_weight_unit | g | |||
tlv_net_weight_label | Net weight | |||
tlv_net_weight_unit | g | |||
tlv_net_weight | 11,559 | |||
tlv_1_type_pack | Unit | |||
tlv_1_type_pcs_pack | Units | |||
tlv_1_pcs_pack | 1 |
Mounting details
![](/pub/media/catalog/product/3021_3032_3031_3037_303201_303101_303701_3058_305801_USE.jpg)
It consists in fixing the lower section to the base, set it in upright
position and levelling it. The subsequent Middle Sections are then
mounted, equipped with the appropriate guy wires; the mounting is
carried out by climbing on the previously mounted sections and hoisting
the new section with the help of the appropriate lifting tools.