The wishlist name can't be left blank

Ethernet Patch Cord S/FTP Cat 6A LSFH, grey

Preconnected Ethernet patch cord with RJ45 connector at each end. It is made of a Category-6A data cable, S/FTP type (foiled pairs and foiled cable), with a flexible copper inner conductor 26 AWG and outer sheath made of grey LSFH (Low Smoke Free of Halogen).
In stock
SKU
2091xx_latiguillos_6A
Select your product
Grouped product items
Ref. 209101 Packing: Bag, Length: 0.5 m
Ref. 209102 Packing: Bag, Length: 1 m
Ref. 209103 Packing: Bag, Length: 2 m
Ref. 209104 Packing: Bag, Length: 3 m
Ref. 209105 Packing: Bag, Length: 5 m
Ref. 209111 Packing: Box, Length: 0.5 m
Ref. 209112 Packing: Box, Length: 1 m
Ref. 209113 Packing: Box, Length: 2 m
Ref. 209114 Packing: Box, Length: 3 m
Ref. 209115 Packing: Box, Length: 5 m
Product Sheet
Highlights
  • S/FTP data Cable
  • Flexible copper inner conductor (26 AWG)
  • Compatible with PoE/PoE+ (Power over Ethernet) technology, allowing the cable to power network devices
  • Aluminium+polyester shielding foil
  • Aluminium outer shielding braid
  • LSFH (Low Smoke Free Of Halogen) outer sheath
  • 79% nominal speed
  • RJ45 connectors with gold plated connector ends with shell nickel plated

Discover

Category 6A

Data cable category Cat 6A (augmented) has its origins on Cat 6 and it is backwards compatible, with the standards of the inferior categories (Cat 6/5e and Cat 3). Category 6A evolves over category 6, allowing to achieve transmission frequencies of up to 500 MHz (in each pair) and 10 Gbps of throughput. It includes characteristics and specifications to avoid crosstalk and noise. This type of data cable can be used in 10BASE-T, 100BASE-T, 1000BASE-T and 10GBASE-T compliant systems.

Our category 6A cables are characterized for:

  • Comply with TIA/EIA-568B.2-1
  • Transfer rate up to 10Gbps
  • Frequency range of up to 650 MHz (higher than the 500 MHz specified by the standard)
  • Nominal impedance of 100 ohms
  • Maximum resistance per conductor below 9.38 ohms/100m

The RJ45 is a connector commonly used in structured cable networks. With up to 8 connection pins, it is adequate both for data networks (8 pairs), as well as telephone networks (2 pairs). It is usually used in networks compliant with standards TIA/EIA-568-B.

What is the PoE technology?

PoE (Power over Ethernet) technology enables the simultaneous transmission of power and data over the same Ethernet network cable, eliminating the need for separate power supplies. Currently, there are three main standards: IEEE 802.3af (PoE), IEEE 802.3at (PoE+), and IEEE 802.3bt (PoE++/4PPoE).
The latter defines two additional types (Type 3 and Type 4) with higher power levels, making four PoE levels in total.

The three aspects that differentiate the different types of PoE are:

  • Maximum PSE (Power Sourcing Equipment) Power: Indicates the maximum amount of electrical power that can be supplied by an equipment over the Ethernet cable.
  • Power for the PD (Powered Device): This is the electrical power that can be received by the device powered by the cable.
  • Number of Twisted Pairs Used: Refers to how many twisted pairs in the Ethernet cable are used to deliver electrical power.
  • Standards PoE Type Maximum PSE Power Power for the PD Nº of Twisted Pairs Used
    IEEE 802.3af Type 1 PoE 15.4W 12.95W 2
    IEEE 802.3at Type 2 PoE+ 30W 25.5W 2
    IEEE 802.3bt Type 3 PoE++
    4PPoE
    60W 51W 4
    Type 4 90-100W 71W 4

    Recommended uses according to PoE type:

  • Type 1: IP phones, basic IP cameras. low-demand Wi-Fi access points, sensors or simple IoT devices.
  • Type 2: Dual band Wi-Fi access points, IP motion cameras (PTZ), IP video phones, alarm systems.
  • Type 3: Wi-Fi 6 / Wi-Fi 6E access points, heated PTZ cameras, multimedia terminals, video conferencing equipment.
  • Type 4: Monitors or touch screens, desktops, high-performance network equipment.

  • Devices that support a certain type of PoE can also be powered by a higher type, offering greater versatility and scalability in installations.

    Main advantages of PoE technology in installations:

  • Quick and cost-effective installation by using the same cable for power and data transmission.
  • Greater installation flexibility as there is no need to rely on auxiliary power sockets.
  • More efficient management and optimised maintenance thanks to the monitoring and administration of the power supply of all equipment from a single point.
  • Cost reduction by avoiding electrical conduits and external power supplies.
  • Increased safety by minimising electrical risks in the installation, thanks to the use of low voltage.

  • Ref. 209101
    TypeS/FTP
    CategorieCat 6A
    Transmission bandwidth650MHz
    Transfer rate10Gbps
    Conductor Diametermm0.16
    Conductor MaterialFlexible copper
    Conductor type AWG26
    Conductor isolation Diametermm1.1
    Conductor isolation MaterialPolyethylene
    Crucifix fillerNo
    Shielding foil of pairsAluminium + Polyester
    Outer shielding braidAluminium
    Outer sheath Diametermm6.2
    Outer sheath MaterialLSFH
    Outer sheath Thicknessmm0.59
    Rip cordNo
    Cable lengthm0.5
    Data connector typeRJ45
    Spark TestVac3000
    Nominal impedanceΩ100
    Conductor resistanceOhm/km < 100
    Nominal speed%79
    Working voltageV300
    Operating temperature°C -25 ... 70
    Frequencies
    1 MHz4 MHz8 MHz10 MHz16 MHz20 MHz25 MHz31.25 MHz62.5 MHz100 MHz200 MHz250 MHz500 MHz
    NEXT (typ.)dB/100m
    65 63 58.2 56.6 53.2 51.6 50 48.4 43.4 39.9 34.8 33.1 27.9
    PS NEXT (typ.)dB/100m
    62 60.5 55.6 54 50.6 49 47.3 45.7 40.6 37.1 31.9 30.2 24.8
    ACR-F (typ.)dB/100m
    63.3 51.2 45.2 43.3 39.2 37.2 35.3 33.4 27.3 23.3 17.2 15.3 9.3
    PS ACR-F (typ.)dB/100m
    60.3 48.2 42.2 40.3 36.2 34.2 32.3 30.4 24.3 20.3 14.2 12.3 6.3
    Return lossesdB
    19 19 19 19 18 17.5 17 16.5 14 12 9 8 6

    Physical data

    Net weight: 22 g

    Gross weight: 22 g

    Width: 6 mm

    Height: 500 mm

    Depth: 6 mm

    Main product weight: 22 g

    Packing

    Bag 1 Units

    Ref. 209102
    TypeS/FTP
    CategorieCat 6A
    Transmission bandwidth650MHz
    Transfer rate10Gbps
    Conductor Diametermm0.16
    Conductor MaterialFlexible copper
    Conductor type AWG26
    Conductor isolation Diametermm1.1
    Conductor isolation MaterialPolyethylene
    Crucifix fillerNo
    Shielding foil of pairsAluminium + Polyester
    Outer shielding braidAluminium
    Outer sheath Diametermm6.2
    Outer sheath MaterialLSFH
    Outer sheath Thicknessmm0.59
    Rip cordNo
    Cable lengthm1
    Data connector typeRJ45
    Spark TestVac3000
    Nominal impedanceΩ100
    Conductor resistanceOhm/km < 100
    Nominal speed%79
    Working voltageV300
    Operating temperature°C -25 ... 70
    Frequencies
    1 MHz4 MHz8 MHz10 MHz16 MHz20 MHz25 MHz31.25 MHz62.5 MHz100 MHz200 MHz250 MHz500 MHz
    NEXT (typ.)dB/100m
    65 63 58.2 56.6 53.2 51.6 50 48.4 43.4 39.9 34.8 33.1 27.9
    PS NEXT (typ.)dB/100m
    62 60.5 55.6 54 50.6 49 47.3 45.7 40.6 37.1 31.9 30.2 24.8
    ACR-F (typ.)dB/100m
    63.3 51.2 45.2 43.3 39.2 37.2 35.3 33.4 27.3 23.3 17.2 15.3 9.3
    PS ACR-F (typ.)dB/100m
    60.3 48.2 42.2 40.3 36.2 34.2 32.3 30.4 24.3 20.3 14.2 12.3 6.3
    Return lossesdB
    19 19 19 19 18 17.5 17 16.5 14 12 9 8 6

    Physical data

    Net weight: 44 g

    Gross weight: 44 g

    Width: 12 mm

    Height: 1,010 mm

    Depth: 10 mm

    Packing

    Bag 1 Units

    Ref. 209103
    TypeS/FTP
    CategorieCat 6A
    Transmission bandwidth650MHz
    Transfer rate10Gbps
    Conductor Diametermm0.16
    Conductor MaterialFlexible copper
    Conductor type AWG26
    Conductor isolation Diametermm1.1
    Conductor isolation MaterialPolyethylene
    Crucifix fillerNo
    Shielding foil of pairsAluminium + Polyester
    Outer shielding braidAluminium
    Outer sheath Diametermm6.2
    Outer sheath MaterialLSFH
    Outer sheath Thicknessmm0.59
    Rip cordNo
    Cable lengthm2
    Data connector typeRJ45
    Spark TestVac3000
    Nominal impedanceΩ100
    Conductor resistanceOhm/km < 100
    Nominal speed%79
    Working voltageV300
    Operating temperature°C -25 ... 70
    Frequencies
    1 MHz4 MHz8 MHz10 MHz16 MHz20 MHz25 MHz31.25 MHz62.5 MHz100 MHz200 MHz250 MHz500 MHz
    NEXT (typ.)dB/100m
    65 63 58.2 56.6 53.2 51.6 50 48.4 43.4 39.9 34.8 33.1 27.9
    PS NEXT (typ.)dB/100m
    62 60.5 55.6 54 50.6 49 47.3 45.7 40.6 37.1 31.9 30.2 24.8
    ACR-F (typ.)dB/100m
    63.3 51.2 45.2 43.3 39.2 37.2 35.3 33.4 27.3 23.3 17.2 15.3 9.3
    PS ACR-F (typ.)dB/100m
    60.3 48.2 42.2 40.3 36.2 34.2 32.3 30.4 24.3 20.3 14.2 12.3 6.3
    Return lossesdB
    19 19 19 19 18 17.5 17 16.5 14 12 9 8 6

    Physical data

    Net weight: 79 g

    Gross weight: 79 g

    Width: 12 mm

    Height: 2,025 mm

    Depth: 10 mm

    Packing

    Bag 1 Units

    Ref. 209104
    TypeS/FTP
    CategorieCat 6A
    Transmission bandwidth650MHz
    Transfer rate10Gbps
    Conductor Diametermm0.16
    Conductor MaterialFlexible copper
    Conductor type AWG26
    Conductor isolation Diametermm1.1
    Conductor isolation MaterialPolyethylene
    Crucifix fillerNo
    Shielding foil of pairsAluminium + Polyester
    Outer shielding braidAluminium
    Outer sheath Diametermm6.2
    Outer sheath MaterialLSFH
    Outer sheath Thicknessmm0.59
    Rip cordNo
    Cable lengthm3
    Data connector typeRJ45
    Spark TestVac3000
    Nominal impedanceΩ100
    Conductor resistanceOhm/km < 100
    Nominal speed%79
    Working voltageV300
    Operating temperature°C -25 ... 70
    Frequencies
    1 MHz4 MHz8 MHz10 MHz16 MHz20 MHz25 MHz31.25 MHz62.5 MHz100 MHz200 MHz250 MHz500 MHz
    NEXT (typ.)dB/100m
    65 63 58.2 56.6 53.2 51.6 50 48.4 43.4 39.9 34.8 33.1 27.9
    PS NEXT (typ.)dB/100m
    62 60.5 55.6 54 50.6 49 47.3 45.7 40.6 37.1 31.9 30.2 24.8
    ACR-F (typ.)dB/100m
    63.3 51.2 45.2 43.3 39.2 37.2 35.3 33.4 27.3 23.3 17.2 15.3 9.3
    PS ACR-F (typ.)dB/100m
    60.3 48.2 42.2 40.3 36.2 34.2 32.3 30.4 24.3 20.3 14.2 12.3 6.3
    Return lossesdB
    19 19 19 19 18 17.5 17 16.5 14 12 9 8 6

    Physical data

    Net weight: 110 g

    Gross weight: 110 g

    Width: 12 mm

    Height: 3,000 mm

    Depth: 10 mm

    Packing

    Bag 1 Units

    Ref. 209105
    TypeS/FTP
    CategorieCat 6A
    Transmission bandwidth650MHz
    Transfer rate10Gbps
    Conductor Diametermm0.16
    Conductor MaterialFlexible copper
    Conductor type AWG26
    Conductor isolation Diametermm1.1
    Conductor isolation MaterialPolyethylene
    Crucifix fillerNo
    Shielding foil of pairsAluminium + Polyester
    Outer shielding braidAluminium
    Outer sheath Diametermm6.2
    Outer sheath MaterialLSFH
    Outer sheath Thicknessmm0.59
    Rip cordNo
    Cable lengthm5
    Data connector typeRJ45
    Spark TestVac3000
    Nominal impedanceΩ100
    Conductor resistanceOhm/km < 100
    Nominal speed%19
    Working voltageV300
    Operating temperature°C -25 ... 70
    Frequencies
    1 MHz4 MHz8 MHz10 MHz16 MHz20 MHz25 MHz31.25 MHz62.5 MHz100 MHz200 MHz250 MHz500 MHz
    NEXT (typ.)dB/100m
    65 63 58.2 56.6 53.2 51.6 50 48.4 43.4 39.9 34.8 33.1 27.9
    PS NEXT (typ.)dB/100m
    62 60.5 55.6 54 50.6 49 47.3 45.7 40.6 37.1 31.9 30.2 24.8
    ACR-F (typ.)dB/100m
    63.3 51.2 45.2 43.3 39.2 37.2 35.3 33.4 27.3 23.3 17.2 15.3 9.3
    PS ACR-F (typ.)dB/100m
    60.3 48.2 42.2 40.3 36.2 34.2 32.3 30.4 24.3 20.3 14.2 12.3 6.3
    Return lossesdB
    19 19 19 19 18 17.5 17 16.5 14 12 9 8 6

    Physical data

    Net weight: 185 g

    Gross weight: 185 g

    Width: 12 mm

    Height: 5,140 mm

    Depth: 10 mm

    Packing

    Bag 1 Units

    Ref. 209111
    TypeS/FTP
    CategorieCat 6A
    Transmission bandwidth650MHz
    Transfer rate10Gbps
    Conductor Diametermm0.16
    Conductor MaterialFlexible copper
    Conductor type AWG26
    Conductor isolation Diametermm1.1
    Conductor isolation MaterialPolyethylene
    Crucifix fillerNo
    Shielding foil of pairsAluminium + Polyester
    Outer shielding braidAluminium
    Outer sheath Diametermm6.2
    Outer sheath MaterialLSFH
    Outer sheath Thicknessmm0.59
    Rip cordNo
    Cable lengthm0.5
    Data connector typeRJ45
    Spark TestVac3000
    Nominal impedanceΩ100
    Conductor resistanceOhm/km < 100
    Nominal speed%79
    Working voltageV300
    Operating temperature°C -25 ... 70
    Frequencies
    1 MHz4 MHz8 MHz10 MHz16 MHz20 MHz25 MHz31.25 MHz62.5 MHz100 MHz200 MHz250 MHz500 MHz
    NEXT (typ.)dB/100m
    65 63 58.2 56.6 53.2 51.6 50 48.4 43.4 39.9 34.8 33.1 27.9
    PS NEXT (typ.)dB/100m
    62 60.5 55.6 54 50.6 49 47.3 45.7 40.6 37.1 31.9 30.2 24.8
    ACR-F (typ.)dB/100m
    63.3 51.2 45.2 43.3 39.2 37.2 35.3 33.4 27.3 23.3 17.2 15.3 9.3
    PS ACR-F (typ.)dB/100m
    60.3 48.2 42.2 40.3 36.2 34.2 32.3 30.4 24.3 20.3 14.2 12.3 6.3
    Return lossesdB
    19 19 19 19 18 17.5 17 16.5 14 12 9 8 6

    Physical data

    Net weight: 220 g

    Gross weight: 250 g

    Width: 6 mm

    Height: 500 mm

    Depth: 6 mm

    Main product weight: 220 g

    Packing

    Box 10 Units

    Ref. 209112
    TypeS/FTP
    CategorieCat 6A
    Transmission bandwidth650MHz
    Transfer rate10Gbps
    Conductor Diametermm0.16
    Conductor MaterialFlexible copper
    Conductor type AWG26
    Conductor isolation Diametermm1.1
    Conductor isolation MaterialPolyethylene
    Crucifix fillerNo
    Shielding foil of pairsAluminium + Polyester
    Outer shielding braidAluminium
    Outer sheath Diametermm6.2
    Outer sheath MaterialLSFH
    Outer sheath Thicknessmm0.59
    Rip cordNo
    Cable lengthm1
    Data connector typeRJ45
    Spark TestVac3000
    Nominal impedanceΩ100
    Conductor resistanceOhm/km < 100
    Nominal speed%79
    Working voltageV300
    Operating temperature°C -25 ... 70
    Frequencies
    1 MHz4 MHz8 MHz10 MHz16 MHz20 MHz25 MHz31.25 MHz62.5 MHz100 MHz200 MHz250 MHz500 MHz
    NEXT (typ.)dB/100m
    65 63 58.2 56.6 53.2 51.6 50 48.4 43.4 39.9 34.8 33.1 27.9
    PS NEXT (typ.)dB/100m
    62 60.5 55.6 54 50.6 49 47.3 45.7 40.6 37.1 31.9 30.2 24.8
    ACR-F (typ.)dB/100m
    63.3 51.2 45.2 43.3 39.2 37.2 35.3 33.4 27.3 23.3 17.2 15.3 9.3
    PS ACR-F (typ.)dB/100m
    60.3 48.2 42.2 40.3 36.2 34.2 32.3 30.4 24.3 20.3 14.2 12.3 6.3
    Return lossesdB
    19 19 19 19 18 17.5 17 16.5 14 12 9 8 6

    Physical data

    Net weight: 40 g

    Gross weight: 40 g

    Width: 12 mm

    Height: 1,010 mm

    Depth: 10 mm

    Main product weight: 44 g

    Packing

    Box 10 Units

    Ref. 209113
    TypeS/FTP
    CategorieCat 6A
    Transmission bandwidth650MHz
    Transfer rate10Gbps
    Conductor Diametermm0.16
    Conductor MaterialFlexible copper
    Conductor type AWG26
    Conductor isolation Diametermm1.1
    Conductor isolation MaterialPolyethylene
    Crucifix fillerNo
    Shielding foil of pairsAluminium + Polyester
    Outer shielding braidAluminium
    Outer sheath Diametermm6.2
    Outer sheath MaterialLSFH
    Outer sheath Thicknessmm0.59
    Rip cordNo
    Cable lengthm2
    Data connector typeRJ45
    Spark TestVac3000
    Nominal impedanceΩ100
    Conductor resistanceOhm/km < 100
    Nominal speed%79
    Working voltageV300
    Operating temperature°C -25 ... 70
    Frequencies
    1 MHz4 MHz8 MHz10 MHz16 MHz20 MHz25 MHz31.25 MHz62.5 MHz100 MHz200 MHz250 MHz500 MHz
    NEXT (typ.)dB/100m
    65 63 58.2 56.6 53.2 51.6 50 48.4 43.4 39.9 34.8 33.1 27.9
    PS NEXT (typ.)dB/100m
    62 60.5 55.6 54 50.6 49 47.3 45.7 40.6 37.1 31.9 30.2 24.8
    ACR-F (typ.)dB/100m
    63.3 51.2 45.2 43.3 39.2 37.2 35.3 33.4 27.3 23.3 17.2 15.3 9.3
    PS ACR-F (typ.)dB/100m
    60.3 48.2 42.2 40.3 36.2 34.2 32.3 30.4 24.3 20.3 14.2 12.3 6.3
    Return lossesdB
    19 19 19 19 18 17.5 17 16.5 14 12 9 8 6

    Physical data

    Net weight: 68 g

    Gross weight: 68 g

    Width: 12 mm

    Height: 2,025 mm

    Depth: 10 mm

    Main product weight: 79 g

    Packing

    Box 10 Units

    Ref. 209114
    TypeS/FTP
    CategorieCat 6A
    Transmission bandwidth650MHz
    Transfer rate10Gbps
    Conductor Diametermm0.16
    Conductor MaterialFlexible copper
    Conductor type AWG26
    Conductor isolation Diametermm1.1
    Conductor isolation MaterialPolyethylene
    Crucifix fillerNo
    Shielding foil of pairsAluminium + Polyester
    Outer shielding braidAluminium
    Outer sheath Diametermm6.2
    Outer sheath MaterialLSFH
    Outer sheath Thicknessmm0.59
    Rip cordNo
    Cable lengthm3
    Data connector typeRJ45
    Spark TestVac3000
    Nominal impedanceΩ100
    Conductor resistanceOhm/km < 100
    Nominal speed%79
    Working voltageV300
    Operating temperature°C -25 ... 70
    Frequencies
    1 MHz4 MHz8 MHz10 MHz16 MHz20 MHz25 MHz31.25 MHz62.5 MHz100 MHz200 MHz250 MHz500 MHz
    NEXT (typ.)dB/100m
    65 63 58.2 56.6 53.2 51.6 50 48.4 43.4 39.9 34.8 33.1 27.9
    PS NEXT (typ.)dB/100m
    62 60.5 55.6 54 50.6 49 47.3 45.7 40.6 37.1 31.9 30.2 24.8
    ACR-F (typ.)dB/100m
    63.3 51.2 45.2 43.3 39.2 37.2 35.3 33.4 27.3 23.3 17.2 15.3 9.3
    PS ACR-F (typ.)dB/100m
    60.3 48.2 42.2 40.3 36.2 34.2 32.3 30.4 24.3 20.3 14.2 12.3 6.3
    Return lossesdB
    19 19 19 19 18 17.5 17 16.5 14 12 9 8 6

    Physical data

    Net weight: 980 g

    Gross weight: 980 g

    Width: 12 mm

    Height: 3,000 mm

    Depth: 10 mm

    Main product weight: 110 g

    Packing

    Box 10 Units

    Ref. 209115
    TypeS/FTP
    CategorieCat 6A
    Transmission bandwidth650MHz
    Transfer rate10Gbps
    Conductor Diametermm0.16
    Conductor MaterialFlexible copper
    Conductor type AWG26
    Conductor isolation Diametermm1.1
    Conductor isolation MaterialPolyethylene
    Crucifix fillerNo
    Shielding foil of pairsAluminium + Polyester
    Outer shielding braidAluminium
    Outer sheath Diametermm6.2
    Outer sheath MaterialLSFH
    Outer sheath Thicknessmm0.59
    Rip cordNo
    Cable lengthm5
    Data connector typeRJ45
    Spark TestVac3000
    Nominal impedanceΩ100
    Conductor resistanceOhm/km < 100
    Nominal speed%79
    Working voltageV300
    Operating temperature°C -25 ... 70
    Frequencies
    1 MHz4 MHz8 MHz10 MHz16 MHz20 MHz25 MHz31.25 MHz62.5 MHz100 MHz200 MHz250 MHz500 MHz
    NEXT (typ.)dB/100m
    65 63 58.2 56.6 53.2 51.6 50 48.4 43.4 39.9 34.8 33.1 27.9
    PS NEXT (typ.)dB/100m
    62 60.5 55.6 54 50.6 49 47.3 45.7 40.6 37.1 31.9 30.2 24.8
    ACR-F (typ.)dB/100m
    63.3 51.2 45.2 43.3 39.2 37.2 35.3 33.4 27.3 23.3 17.2 15.3 9.3
    PS ACR-F (typ.)dB/100m
    60.3 48.2 42.2 40.3 36.2 34.2 32.3 30.4 24.3 20.3 14.2 12.3 6.3
    Return lossesdB
    19 19 19 19 18 17.5 17 16.5 14 12 9 8 6

    Physical data

    Net weight: 1,680 g

    Gross weight: 1,680 g

    Width: 12 mm

    Height: 5,140 mm

    Depth: 10 mm

    Main product weight: 185 g

    Packing

    Box 10 Units

    More Information
    tlv_reflog_group_search PK6AL05G-T,PK6AL1G-T,PK6AL2G-T,PK6AL3G-T,PK6AL5G-T,PK6AL05G,PK6AL1G,PK6AL2G,PK6AL3G,PK6AL5G
    tlv_tags

    Category 6A

    Data cable category Cat 6A (augmented) has its origins on Cat 6 and it is backwards compatible, with the standards of the inferior categories (Cat 6/5e and Cat 3). Category 6A evolves over category 6, allowing to achieve transmission frequencies of up to 500 MHz (in each pair) and 10 Gbps of throughput. It includes characteristics and specifications to avoid crosstalk and noise. This type of data cable can be used in 10BASE-T, 100BASE-T, 1000BASE-T and 10GBASE-T compliant systems.

    Our category 6A cables are characterized for:

    • Comply with TIA/EIA-568B.2-1
    • Transfer rate up to 10Gbps
    • Frequency range of up to 650 MHz (higher than the 500 MHz specified by the standard)
    • Nominal impedance of 100 ohms
    • Maximum resistance per conductor below 9.38 ohms/100m

    The RJ45 is a connector commonly used in structured cable networks. With up to 8 connection pins, it is adequate both for data networks (8 pairs), as well as telephone networks (2 pairs). It is usually used in networks compliant with standards TIA/EIA-568-B.

    What is the PoE technology?

    PoE (Power over Ethernet) technology enables the simultaneous transmission of power and data over the same Ethernet network cable, eliminating the need for separate power supplies. Currently, there are three main standards: IEEE 802.3af (PoE), IEEE 802.3at (PoE+), and IEEE 802.3bt (PoE++/4PPoE).
    The latter defines two additional types (Type 3 and Type 4) with higher power levels, making four PoE levels in total.

    The three aspects that differentiate the different types of PoE are:

  • Maximum PSE (Power Sourcing Equipment) Power: Indicates the maximum amount of electrical power that can be supplied by an equipment over the Ethernet cable.
  • Power for the PD (Powered Device): This is the electrical power that can be received by the device powered by the cable.
  • Number of Twisted Pairs Used: Refers to how many twisted pairs in the Ethernet cable are used to deliver electrical power.
  • Standards PoE Type Maximum PSE Power Power for the PD Nº of Twisted Pairs Used
    IEEE 802.3af Type 1 PoE 15.4W 12.95W 2
    IEEE 802.3at Type 2 PoE+ 30W 25.5W 2
    IEEE 802.3bt Type 3 PoE++
    4PPoE
    60W 51W 4
    Type 4 90-100W 71W 4

    Recommended uses according to PoE type:

  • Type 1: IP phones, basic IP cameras. low-demand Wi-Fi access points, sensors or simple IoT devices.
  • Type 2: Dual band Wi-Fi access points, IP motion cameras (PTZ), IP video phones, alarm systems.
  • Type 3: Wi-Fi 6 / Wi-Fi 6E access points, heated PTZ cameras, multimedia terminals, video conferencing equipment.
  • Type 4: Monitors or touch screens, desktops, high-performance network equipment.

  • Devices that support a certain type of PoE can also be powered by a higher type, offering greater versatility and scalability in installations.

    Main advantages of PoE technology in installations:

  • Quick and cost-effective installation by using the same cable for power and data transmission.
  • Greater installation flexibility as there is no need to rely on auxiliary power sockets.
  • More efficient management and optimised maintenance thanks to the monitoring and administration of the power supply of all equipment from a single point.
  • Cost reduction by avoiding electrical conduits and external power supplies.
  • Increased safety by minimising electrical risks in the installation, thanks to the use of low voltage.
  • tlv_tabla_especificaciones
    TypeS/FTP
    CategorieCat 6A
    Transmission bandwidth650MHz
    Transfer rate10Gbps
    Conductor Diametermm0.16
    Conductor MaterialFlexible copper
    Conductor type AWG26
    Conductor isolation Diametermm1.1
    Conductor isolation MaterialPolyethylene
    Crucifix fillerNo
    Shielding foil of pairsAluminium + Polyester
    Outer shielding braidAluminium
    Outer sheath Diametermm6.2
    Outer sheath MaterialLSFH
    Outer sheath Thicknessmm0.59
    Rip cordNo
    Cable lengthm0.5
    Data connector typeRJ45
    Spark TestVac3000
    Nominal impedanceΩ100
    Conductor resistanceOhm/km < 100
    Nominal speed%79
    Working voltageV300
    Operating temperature°C -25 ... 70
    Frequencies
    1 MHz4 MHz8 MHz10 MHz16 MHz20 MHz25 MHz31.25 MHz62.5 MHz100 MHz200 MHz250 MHz500 MHz
    NEXT (typ.)dB/100m
    65 63 58.2 56.6 53.2 51.6 50 48.4 43.4 39.9 34.8 33.1 27.9
    PS NEXT (typ.)dB/100m
    62 60.5 55.6 54 50.6 49 47.3 45.7 40.6 37.1 31.9 30.2 24.8
    ACR-F (typ.)dB/100m
    63.3 51.2 45.2 43.3 39.2 37.2 35.3 33.4 27.3 23.3 17.2 15.3 9.3
    PS ACR-F (typ.)dB/100m
    60.3 48.2 42.2 40.3 36.2 34.2 32.3 30.4 24.3 20.3 14.2 12.3 6.3
    Return lossesdB
    19 19 19 19 18 17.5 17 16.5 14 12 9 8 6
    tlv_sku_group_search 209101,209102,209103,209104,209105,209111,209112,209113,209114,209115
    tlv_diferencias Packing: Bag, Length: 0.5 m
    tlv_dim_product_x 6
    tlv_dim_product_x_label Width
    tlv_dim_product_x_unit mm
    tlv_dim_product_y 500
    tlv_dim_product_y_label Height
    tlv_dim_product_y_unit mm
    tlv_dim_product_z 6
    tlv_dim_product_z_label Depth
    tlv_dim_product_z_unit mm
    tlv_weight_product_label Main product weight
    tlv_weight_product 22
    tlv_weight_product_unit g
    tlv_gross_weight_label Gross weight
    tlv_gross_weight 22
    tlv_gross_weight_unit g
    tlv_net_weight_label Net weight
    tlv_net_weight_unit g
    tlv_net_weight 22
    tlv_1_type_pack Bag
    tlv_1_type_pcs_pack Units
    tlv_1_pcs_pack 1