Twin transmodulator equipped with remultiplexing DVBS/S2 - DVBC (QAM Annex A) equipped with CI

Transmodulator that generates one QAM Multiplex from the multiplexing of the services available in up to 3 different TV SAT transponders. These may be extracted from 2 different satellites (2 independent SAT inputs), or from a single satellite, using the headend's input loop.

In stock

SKU

56440x_Transmodulador_Twin_DVBS_DVBC

Grouped product items
Ref. 564401 Firmware: Generic Codes EAN13: 8424450170304

Product Sheet

Skip to the end of the images gallery

Televes reserves the right to modify the product

Skip to the beginning of the images gallery

Highlights

Total or selective removal of the services present in the received transponder, to avoid them being detected (and memorized) by the receivers (STB)
Editable TS_ID, which makes programme/service detection easier on the receiver (STB), since the channel scan is based on this identifier
LCN (Logical Channel Number) allows the assignment of the services present in the output to an LCN, which makes the ordering of the channels easier on the receivers (STB)
Provides information regarding both the occupation of each specific service and the global output occupation, which allows the optimization of the services being distributed
Can be remotely controlled using CDC (Headend control)
Device monitoring and signal status LEDs

Main features

Null packet insertion (“Stuffing”) allows the receiver (STB) to perform a faster scan
The encrypted satellite channels are transformed into free terrestrial services through the CI interface and the appropriate CAM module. Depending on the CAM type used (standard/professional), one or several services may be opened for free visualization

Ref. 564401

References				564101/ 03	564401
SATINPUT	SAT	Input frequency range	MHz	950...2150
		Frequency steps		1
		Input level	dBμV	42...82
		Loop-through losses	dB	≤ 1,5
		LNB powering	Vdc	13V/17V/ OFF - 22KHz (ON/OFF)
		Input return losses (typ.)	dB	> 10
		Input impedance	Ω	75
	DVB-S	Symbol rate (Modulation)	Mbaud	2 - 42,5 (QPSK)
		FEC inner code		Viterbi (1/2, 2/3, 3/4, 5/6, 7/8)
		FEC outer code		RS (188/204)
		Roll-Off factor	%	35
	DVB-S2	Symbol rate (Modulation)	Mbaud	10 - 30 (QPSK, 8PSK)
		FEC inner code		LDPC (1/2, 1/3, 1/4, 2/3, 2/5, 3/4, 3/5, 4/5, 5/6, 8/9, 9/10)
		FEC outer code		BCH (Bose-Chaudhuri-Hocquenghem)
		Roll-Off factor	%	20, 25, 35
DVB-C OUTPUT	QAM	Modulation (Constellation)		16, 32, 64, 128, 256QAM
		Symbol rate	Mbaud	6,9
		Scrambling		DVB EN 300429
		Interleaving		DVB EN 300429
		FEC outer code		RS (188, 204)
		Roll-Off factor	%	15
		PCR correction		Yes
		Services deleting		Yes
		Network_ID		Yes
		Original Network_ID		Yes
		TS_ID		Yes
		S_ID		Yes
		LCN		Yes
		PID		Yes
		Spectral inversion		Normal, Inverted
		Channel bandwidth (max.)	Mhz	8,3
	RF	Output frequency		47...862
		Frequency steps	KHz	250
		Output level (max. typ.)	dBμV	> 80 ± 5
		Output level regulation margin	dB	>15
		Output loop-through losses		< 1,5
		Output return losses (typ.)		> 12
		Impedance	Ω	75
		MER	dB	>40
		Output modes		normal, CW (Continuous Wave), OFF, NULL
GENERAL		Powering voltage	Vdc	24
		Consumption	mA	520 (0 LNB - 0 CAM) 620 (0 LNB - 1 CAM) 870 (1 LNB - 1 CAM) 1120 (2 LNBs - 1 CAM)	530 (0 LNB - 0 CAM) 630 (0 LNB - 1 CAM) 880 (1 LNB - 1 CAM) 1130 (2 LNBs - 1 CAM)
		Protection index	IP	20

Physical data

Net weight: 1,010 g

Gross weight: 1,010 g

Width: 50 mm

Height: 219 mm

Depth: 175 mm

Main product weight: 967 g

Packing

Box 1 Units

More Information

tlv_reflog_group_search

U3Q2QA-S2-CI

tlv_tabla_especificaciones

References				564101/ 03	564401
SATINPUT	SAT	Input frequency range	MHz	950...2150
		Frequency steps		1
		Input level	dBμV	42...82
		Loop-through losses	dB	≤ 1,5
		LNB powering	Vdc	13V/17V/ OFF - 22KHz (ON/OFF)
		Input return losses (typ.)	dB	> 10
		Input impedance	Ω	75
	DVB-S	Symbol rate (Modulation)	Mbaud	2 - 42,5 (QPSK)
		FEC inner code		Viterbi (1/2, 2/3, 3/4, 5/6, 7/8)
		FEC outer code		RS (188/204)
		Roll-Off factor	%	35
	DVB-S2	Symbol rate (Modulation)	Mbaud	10 - 30 (QPSK, 8PSK)
		FEC inner code		LDPC (1/2, 1/3, 1/4, 2/3, 2/5, 3/4, 3/5, 4/5, 5/6, 8/9, 9/10)
		FEC outer code		BCH (Bose-Chaudhuri-Hocquenghem)
		Roll-Off factor	%	20, 25, 35
DVB-C OUTPUT	QAM	Modulation (Constellation)		16, 32, 64, 128, 256QAM
		Symbol rate	Mbaud	6,9
		Scrambling		DVB EN 300429
		Interleaving		DVB EN 300429
		FEC outer code		RS (188, 204)
		Roll-Off factor	%	15
		PCR correction		Yes
		Services deleting		Yes
		Network_ID		Yes
		Original Network_ID		Yes
		TS_ID		Yes
		S_ID		Yes
		LCN		Yes
		PID		Yes
		Spectral inversion		Normal, Inverted
		Channel bandwidth (max.)	Mhz	8,3
	RF	Output frequency		47...862
		Frequency steps	KHz	250
		Output level (max. typ.)	dBμV	> 80 ± 5
		Output level regulation margin	dB	>15
		Output loop-through losses		< 1,5
		Output return losses (typ.)		> 12
		Impedance	Ω	75
		MER	dB	>40
		Output modes		normal, CW (Continuous Wave), OFF, NULL
GENERAL		Powering voltage	Vdc	24
		Consumption	mA	520 (0 LNB - 0 CAM) 620 (0 LNB - 1 CAM) 870 (1 LNB - 1 CAM) 1120 (2 LNBs - 1 CAM)	530 (0 LNB - 0 CAM) 630 (0 LNB - 1 CAM) 880 (1 LNB - 1 CAM) 1130 (2 LNBs - 1 CAM)
		Protection index	IP	20

tlv_sku_group_search

564401

tlv_diferencias

Firmware: Generic

The illustration shows an installation to distribute 20 channels of MUX DVBS2_QAM CI T-0X.

Block diagram