The wishlist name can't be left blank
Twin transmodulator equipped with remultiplexing DVBS/S2 - DVBC (QAM Annex A) equipped with CI

Twin transmodulator equipped with remultiplexing DVBS/S2 - DVBC (QAM Annex A) equipped with CI

Twin Transmodulator DVBS/S2 - DVBC (QAM Annex A)

Twin Transmodulator DVBS/S2 - DVBC (QAM Annex A)

Hexa Transmodulator

DVBS/S2 - DVBC (QAM Annex A)

Transmodulator that generates six QAM (DVB-C) Multiplex from the services available in six TV SAT transponders. Inputs may either be in loop or independent from each other. In the latter case, each TVSAT demodulator may be connected to any of the two inputs.

An outstanding optimized power consumption allows the building of compact small-size headends with multiple services.

Ref. 564501
Product Sheet
EAN13: 8424450184301
SKU
564501
Highlights
  • Total or selective removal of the services present in the received transponder, to avoid them being detected (and memorized) by the receivers (STB)
  • Editable TS_ID, which makes programme/service detection easier on the receiver (STB), since the channel scan is based on this identifier
  • LCN (Logical Channel Number) allows the assignment of the services present in the output to an LCN, which makes the ordering of the channels easier on the receivers (STB)
  • Provides information regarding both the occupation of each specific service and the global output occupation, which allows the optimization of the services being distributed
  • Can be remotely controlled using CDC (Headend control)
  • Device monitoring and signal status LEDs

Main features
  • Null packet insertion (“Stuffing”) allows the receiver (STB) to perform a faster scan
  • PID filtering allows the removal of undesired services inside a Multiplex (enhanced occupation use)
  • Editable Network_ID and Original Network_ID allow the control of network identifiers
  • Its outputs can be configured with loopmode either activate or deactivate

SAT INPUT
SAT Input frequency range MHz 950...2150
Frequency steps 1
Input level dBμV 49 - 84
Loop-through losses dB ≤ 1,5
LNB powering Vdc 13V/17V/ OFF - 22KHz (ON/OFF)
Input return losses (typ.) dB > 10
Input impedance Ω 75
DVB-S Symbol rate (Modulation) Mbaud 2 - 42,5 (QPSK)
FEC inner code Viterbi (1/2, 2/3, 3/4, 5/6, 7/8)
FEC outer code RS (188/204)
Roll-Off factor % 35
DVB-S2 Symbol rate (Modulation) Mbaud 10 - 30 (QPSK, 8PSK)
FEC inner code LDPC (1/2, 1/3, 1/4, 2/3, 2/5, 3/4, 3/5, 4/5, 5/6, 8/9, 9/10)
FEC outer code BCH (Bose-Chaudhuri-Hocquenghem)
Roll-Off factor % 20, 25, 35
DVB-C OUTPUT QAM Modulation (Constellation) 16, 32, 64, 128, 256QAM
Symbol rate Mbaud 1 - 7,2
Scrambling DVB EN 300429
Interleaving DVB EN 300429
FEC outer code RS (188, 204)
Roll-Off factor % 15
PCR correction Yes
Spectral inversion Normal, Inverted
Channel bandwidth (max.) MHz 8,3
RF Output frequency MHz 46...999
Frequency steps KHz 250
Output level (max.) dBμV 90
Output level regulation margin dB >15
Output loop-through losses ≤ 1,5
Output return losses (typ.) > 12 típ.
Output impedance Ω 75
GENERAL Powering voltage Vdc 24
Consumption mA 1000 (0 LNB); 1300 (1 LNB)
Protection index
IP 20
More Information
tlv_reflog UQQA-S2-6
tlv_tabla_especificaciones
SAT INPUT
SAT Input frequency range MHz 950...2150
Frequency steps 1
Input level dBμV 49 - 84
Loop-through losses dB ≤ 1,5
LNB powering Vdc 13V/17V/ OFF - 22KHz (ON/OFF)
Input return losses (typ.) dB > 10
Input impedance Ω 75
DVB-S Symbol rate (Modulation) Mbaud 2 - 42,5 (QPSK)
FEC inner code Viterbi (1/2, 2/3, 3/4, 5/6, 7/8)
FEC outer code RS (188/204)
Roll-Off factor % 35
DVB-S2 Symbol rate (Modulation) Mbaud 10 - 30 (QPSK, 8PSK)
FEC inner code LDPC (1/2, 1/3, 1/4, 2/3, 2/5, 3/4, 3/5, 4/5, 5/6, 8/9, 9/10)
FEC outer code BCH (Bose-Chaudhuri-Hocquenghem)
Roll-Off factor % 20, 25, 35
DVB-C OUTPUT QAM Modulation (Constellation) 16, 32, 64, 128, 256QAM
Symbol rate Mbaud 1 - 7,2
Scrambling DVB EN 300429
Interleaving DVB EN 300429
FEC outer code RS (188, 204)
Roll-Off factor % 15
PCR correction Yes
Spectral inversion Normal, Inverted
Channel bandwidth (max.) MHz 8,3
RF Output frequency MHz 46...999
Frequency steps KHz 250
Output level (max.) dBμV 90
Output level regulation margin dB >15
Output loop-through losses ≤ 1,5
Output return losses (typ.) > 12 típ.
Output impedance Ω 75
GENERAL Powering voltage Vdc 24
Consumption mA 1000 (0 LNB); 1300 (1 LNB)
Protection index
IP 20
tlv_ean 8424450184301

Block diagram