Category-6A data cable, U/UTP type (Unfoiled), with copper conductor and PVC sheath, violet colour. It achieves a bandwidth up to 650 MHz (higher than the 500 MHz specified by the standard).
Compatible with PoE/PoE+ (Power over Ethernet) technology, allowing the cable to power network devices
PVC (polyvinyl chloride) outer sheath
72% nominal speed
Certified according to the applicable standards as defined in the available declarations of conformity and performance
Discover
Category 6
Data cable category Cat 6 complies with the standard for Gigabit Ethernet and it is backwards compatible, with the standards of the inferior categories (Cat 5/5e and Cat 3). Category 6 evolves over category 5E, allowing to achieve transmission frequencies of up to 250 MHz (in each pair) and 1 Gbps of throughput. It includes characteristics and specifications to avoid crosstalk and noise. This type of data cable can be used in 10BASE-T, 100BASE-T and 1000BASE-T (Gigabit Ethernet) compliant systems.
Our category 6 cables are characterized:
Comply with TIA/EIA-568B.2-1
Crucifix type padding
Transfer rate up to 1Gbps
Frequency range of up to 250 MHz and up to 400MHz in some references
Includes rip cord to make it easier to strip the cable
Nominal impedance of 100 ohms
Maximum resistance per conductor below 9.38 ohms/100m
Compatibility of RJ45 connectors with Televes data cables:
Reference
219602
219701
219901
219910
212201
2123
212302
212305
212310
212101
219302
219312
219313
219322
Female connectors
209901/209907
OK
OK
OK
OK
OK
OK
OK
OK
OK
X
X
X
X
X
209905
OK
OK
OK
OK
OK
OK
OK
OK
OK
X
X
X
X
X
209921/209925
OK
OK
OK
OK
OK
OK
OK
OK
OK
X
X
OK
OK
X
209926
OK
OK
OK
OK
OK
OK
OK
OK
OK
X
X
OK
OK
X
209903
OK*
OK*
OK
OK*
OK*
OK*
OK*
OK*
OK*
OK
X
X
X
X
209923
OK*
OK*
OK
OK*
OK*
OK*
OK*
OK*
OK*
OK
OK
OK*
OK*
OK
209929/209501
OK*
OK*
OK
OK*
OK*
OK*
OK*
OK*
OK*
OK
OK
OK*
OK*
OK
Male connectors
209902
OK
OK
OK
OK
OK
OK
OK
OK
OK
X
X
X
X
X
209961/209962
OK
OK
OK
OK
OK
OK
OK
OK
OK
X
X
X
X
X
209904
OK*
OK*
OK
OK*
OK*
OK*
OK*
OK*
OK*
OK
X
X
X
X
209906
OK
OK
OK
OK
OK
OK
OK
OK
OK
X
X
X
X
X
209965/209966
OK
OK
OK
OK
OK
OK
OK
OK
OK
X
X
X
X
X
209922
OK*
OK*
OK
OK*
OK*
OK*
OK*
OK*
OK*
X
X
OK
OK
X
209924
OK*
OK*
OK
OK*
OK*
OK*
OK*
OK*
OK*
OK*
OK
OK*
OK*
OK
OK Compatible OK* Compatible, but there are better choices X Incompatible ** Mechanical compatibility
What is the PoE technology?
PoE (Power over Ethernet) technology enables the simultaneous transmission of power and data over the same Ethernet network cable, eliminating the need for separate power supplies.
Currently, there are three main standards: IEEE 802.3af (PoE), IEEE 802.3at (PoE+), and IEEE 802.3bt (PoE++/4PPoE).
The latter defines two additional types (Type 3 and Type 4) whit higher power levels, making four PoE levels in total.
The three aspects that differentiate the different types of PoE are:
Maximum PSE (Powr Sourcing Equipments) Power: Indicates the maximum amount of electrical power that can be supplied by an equipment over the Ethernet cable.
Power for the PD (Powered Device): This is the electrical power that can be received by the device powered by the cable.
Number of Twisted Pairs Used: Refers to how many twisted pairs in the Ethernet cable are used to deliver electrical power.
Standards
PoE Type
Maximum PSE Power
Power for the PD
Nº of Twisted Pairs Used
IEEE 802.3af
Type 1
PoE
15.4W
12.95W
2
IEEE 802.3at
Type 2
PoE+
30W
25.5W
2
IEEE 802.3bt
Type 3
PoE++ 4PPoE
60W
51W
4
Type 4
90-100W
71W
4
Recommended uses according to PoE type:
Type 1: IP phones, basic IP camaras. low-demand Wi-Fi access points, sensors or simple IoT devices.
Type 2: Dual band Wi-Fi access points, IP motion camaras (PTZ), IP video phones, alarm systemns.
Type 3: Wi-Fi 6 / Wi-Fi 6E access points, heated PTZ camaras, multimedia terminals, video conferencing equipment.
Type 4: Monitors or touch screens, desktops, high-performance network equipment.
Devices that support a certain type of PoE can also be powered by a higher type, offering greater versatility and scalability in installations.
Main advantages of PoE technology in installations:
Quick and cost-effective installation by using the same cable for power and data transmission.
Greater installation flexibility as there is no need to rely on auxiliary power sockets.
More efficient management and optimised maintenance thanks to the monitoring and administration of the power supply of all equipment from a single point.
Cost reduction by avoiding electrical conduits and external power supplies.
Increased safety by minimising electrical risks in the installation, thanks to the use of low voltage.
Model
DK6000A
Type
U/UTP
Categorie
Cat 6A
Transmission bandwidth
650MHz
Transfer rate
10Gbps
Conductor Diameter
mm
0.56
Conductor Material
Solid copper
Conductor type AWG
23
Conductor isolation Diameter
mm
1.01
Conductor isolation Material
Polyethylene
Crucifix filler
Yes
Outer sheath Diameter
mm
6.4
Outer sheath Material
PVC
Outer sheath Thickness
mm
0.5
Rip cord
Yes
Spark Test
Vac
3000
Nominal impedance
Ω
100
Conductor resistance
Ohm/100m
< 9.38
Nominal speed
%
68
Working voltage
V
300
Operating temperature
°C
-25 ... 70
Frequencies
1 MHz
4 MHz
8 MHz
10 MHz
16 MHz
20 MHz
25 MHz
31.25 MHz
62.5 MHz
100 MHz
200 MHz
250 MHz
300 MHz
400 MHz
500 MHz
600 MHz
650 MHz
Attenuation (max.)
dB/100m
2.1
3.8
5.3
5.9
7.5
8.4
9.4
10.5
15
19.1
27.6
31.1
34.3
40.1
45
--
--
Attenuation (typ.)
dB/100m
1.9
3.7
5.2
5.8
7.5
8.3
9.4
10.5
15
19.1
27.4
30.6
33.6
39.1
44.2
48.7
51
NEXT (min.)
dB/100m
74.3
65.3
60.8
59.3
56.2
54.8
53.3
51.9
47.4
44.3
39.8
38.3
37.1
35.3
34
--
--
NEXT (typ.)
dB/100m
83.7
80.6
75.1
71
68.2
65.3
63.9
59.5
56
51.7
46
49.2
47.9
43.1
39.7
33.9
31.1
PS NEXT (min.)
dB/100m
72.3
63.3
58.8
57.3
54.2
52.8
51.3
49.9
45.4
42.3
37.8
36.3
35.1
33.3
32
--
--
PS NEXT (typ.)
dB/100m
82.5
78.8
72.6
68.8
67
64.5
63.2
59
54.9
52.8
44.5
46.7
45
41.7
35.9
32
29
ACR-N (min.)
dB/100m
72.2
61.5
55.5
53.4
48.7
46.4
43.9
41.4
32.4
25.2
12.2
7.2
2.8
-4.8
-12
--
--
ACR-N (typ.)
dB/100m
81.8
77
70
65
60.7
56.8
54.4
48.9
41
32.6
19.8
18.6
14.9
5.6
-3.3
-14.8
-19.9
PS ACR-N (min.)
dB/100m
70.2
59.5
53.5
51.4
46.7
44.4
41.9
39.4
30.4
23.2
10.2
5.2
0.8
-6.8
-14
--
--
PS ACR-N (typ.)
dB/100m
80.6
75.1
67.5
63
59.8
56.4
53.8
48.4
39.9
31.7
18.5
16.5
13.2
4.6
-6.3
-15
-20
ACR-F (min.)
dB/100m
67.8
55.8
49.7
47.8
43.7
41.8
39.8
37.9
31.9
27.8
21.8
19.8
18.3
15.8
14
--
--
ACR-F (typ.)
dB/100m
80.7
68.9
62.7
61.3
59.1
58.8
57.9
56.1
45.4
47.9
33.6
37.1
35.8
28.5
28.2
26
25.4
PS ACR-F (min.)
dB/100m
64.8
52.8
46.7
44.8
40.7
38.8
36.8
34.9
28.9
24.8
18.8
16.8
15.3
12.8
11
--
--
PS ACR-F (typ.)
dB/100m
78.6
67
61
59.7
57.1
56
54.4
53.8
43.1
46.2
32.7
34.9
33.7
27.3
26.5
23.4
22.8
Return losses (min.)
dB
20
23
24.5
25
25
25
24.3
23.6
21.5
20.1
18
17.3
16.8
15.9
15
--
--
Return losses
dB
27.4
30
32.4
30.6
33.1
33
31.5
31.5
28.3
30.1
29.2
24.8
23.3
23.1
20.1
18.2
15.2
Physical data
Net weight: 52 g
Gross weight: 54 g
Width: 7 mm
Height: 1,000 mm
Depth: 7 mm
Main product weight: 52 g
Packing
Reel 500 m
Pallet 8000 m
More Information
tlv_tags
Category 6
Data cable category Cat 6 complies with the standard for Gigabit Ethernet and it is backwards compatible, with the standards of the inferior categories (Cat 5/5e and Cat 3). Category 6 evolves over category 5E, allowing to achieve transmission frequencies of up to 250 MHz (in each pair) and 1 Gbps of throughput. It includes characteristics and specifications to avoid crosstalk and noise. This type of data cable can be used in 10BASE-T, 100BASE-T and 1000BASE-T (Gigabit Ethernet) compliant systems.
Our category 6 cables are characterized:
Comply with TIA/EIA-568B.2-1
Crucifix type padding
Transfer rate up to 1Gbps
Frequency range of up to 250 MHz and up to 400MHz in some references
Includes rip cord to make it easier to strip the cable
Nominal impedance of 100 ohms
Maximum resistance per conductor below 9.38 ohms/100m
Compatibility of RJ45 connectors with Televes data cables:
Reference
219602
219701
219901
219910
212201
2123
212302
212305
212310
212101
219302
219312
219313
219322
Female connectors
209901/209907
OK
OK
OK
OK
OK
OK
OK
OK
OK
X
X
X
X
X
209905
OK
OK
OK
OK
OK
OK
OK
OK
OK
X
X
X
X
X
209921/209925
OK
OK
OK
OK
OK
OK
OK
OK
OK
X
X
OK
OK
X
209926
OK
OK
OK
OK
OK
OK
OK
OK
OK
X
X
OK
OK
X
209903
OK*
OK*
OK
OK*
OK*
OK*
OK*
OK*
OK*
OK
X
X
X
X
209923
OK*
OK*
OK
OK*
OK*
OK*
OK*
OK*
OK*
OK
OK
OK*
OK*
OK
209929/209501
OK*
OK*
OK
OK*
OK*
OK*
OK*
OK*
OK*
OK
OK
OK*
OK*
OK
Male connectors
209902
OK
OK
OK
OK
OK
OK
OK
OK
OK
X
X
X
X
X
209961/209962
OK
OK
OK
OK
OK
OK
OK
OK
OK
X
X
X
X
X
209904
OK*
OK*
OK
OK*
OK*
OK*
OK*
OK*
OK*
OK
X
X
X
X
209906
OK
OK
OK
OK
OK
OK
OK
OK
OK
X
X
X
X
X
209965/209966
OK
OK
OK
OK
OK
OK
OK
OK
OK
X
X
X
X
X
209922
OK*
OK*
OK
OK*
OK*
OK*
OK*
OK*
OK*
X
X
OK
OK
X
209924
OK*
OK*
OK
OK*
OK*
OK*
OK*
OK*
OK*
OK*
OK
OK*
OK*
OK
OK Compatible OK* Compatible, but there are better choices X Incompatible ** Mechanical compatibility
What is the PoE technology?
PoE (Power over Ethernet) technology enables the simultaneous transmission of power and data over the same Ethernet network cable, eliminating the need for separate power supplies.
Currently, there are three main standards: IEEE 802.3af (PoE), IEEE 802.3at (PoE+), and IEEE 802.3bt (PoE++/4PPoE).
The latter defines two additional types (Type 3 and Type 4) whit higher power levels, making four PoE levels in total.
The three aspects that differentiate the different types of PoE are:
Maximum PSE (Powr Sourcing Equipments) Power: Indicates the maximum amount of electrical power that can be supplied by an equipment over the Ethernet cable.
Power for the PD (Powered Device): This is the electrical power that can be received by the device powered by the cable.
Number of Twisted Pairs Used: Refers to how many twisted pairs in the Ethernet cable are used to deliver electrical power.
Standards
PoE Type
Maximum PSE Power
Power for the PD
Nº of Twisted Pairs Used
IEEE 802.3af
Type 1
PoE
15.4W
12.95W
2
IEEE 802.3at
Type 2
PoE+
30W
25.5W
2
IEEE 802.3bt
Type 3
PoE++ 4PPoE
60W
51W
4
Type 4
90-100W
71W
4
Recommended uses according to PoE type:
Type 1: IP phones, basic IP camaras. low-demand Wi-Fi access points, sensors or simple IoT devices.
Type 2: Dual band Wi-Fi access points, IP motion camaras (PTZ), IP video phones, alarm systemns.
Type 3: Wi-Fi 6 / Wi-Fi 6E access points, heated PTZ camaras, multimedia terminals, video conferencing equipment.
Type 4: Monitors or touch screens, desktops, high-performance network equipment.
Devices that support a certain type of PoE can also be powered by a higher type, offering greater versatility and scalability in installations.
Main advantages of PoE technology in installations:
Quick and cost-effective installation by using the same cable for power and data transmission.
Greater installation flexibility as there is no need to rely on auxiliary power sockets.
More efficient management and optimised maintenance thanks to the monitoring and administration of the power supply of all equipment from a single point.
Cost reduction by avoiding electrical conduits and external power supplies.
Increased safety by minimising electrical risks in the installation, thanks to the use of low voltage.
