The wishlist name can't be left blank
Octo Analogue Modulator PAL B/G for VHF/UHF

Octo Analogue Modulator PAL B/G for VHF/UHF

HD - DVB-T Encoder/Modulator Conversion of HD signals into a DTT channel, with HDMI pass-through

A device that transforms a digital video and audio (HDMI) signal into a modulated FullHD (MPEG-4/H.264) signal into a DVB-T channel. The input digital signal comes from an external SD/HD source: satellite receiver, DVR/NVR, DVD, CCTV, etc.
It is equipped with an HDMI loop through to connect the input signal to the TV/Monitor
The channel generated by the HDMI source can be mixed with the DTT signal and then distributed over a single coaxial cable. Its content can thus be displayed on all the receiving devices of the system.

The device can be configured with an App for Android 6.0 / iOS 13 or higher.

Download the app

Ref. 585301
Generate PDF
EAN13: 8424450211670
SKU
585301
Highlights
  • Fully configurable: input format, transport stream configuration, output channel configuration...
  • Perfect image and audio synchronization
  • High-quality encoding, thanks to VBR (Variable Bit Rate)
  • Easy and intuitive App (Android/iOS) to configure the device
  • Energy efficiency and low consumption

Main features
  • HDMI pass-through
  • MPEG-4 (H.264) format video encoding
  • Compatibility with multiple resolutions (up to 1080p @60fps)
  • Automatic detection of the input resolution
  • Video loop playback via USB port (.TS format)
  • Firmware update via USB

ENCODER
Video Coding H264 Profile Level 4.0
Interface HDMI IN/HDMI OUT (loop through)
Input resolution
1080p Max.
Output resolution
Auto, 1080p, 720p, 576p, 480p
Bit rate Mbps 2, 4, 6, 8, 12, 18
Audio Interface HDMI IN/HDMI OUT (loop through)
Format MPEG-2 / AAC / AC3
Bit rate kbps 192
MODULATOR
Standard DVB-T (ETSI EN 300 744)
Modulation QPSK, 16QAM, 64QAM
Fraquency range
MHz 174 ... 230 / 470 ... 862
MER dB 35 typ.
RF output level
dBµV 70 ... 90
RF adjust level
dB 20 (1dB per step)
Bandwidth
MHz 6, 7, 8
USB
File system

FAT 12/16/32

Maximum file is 4GB*

Recommended memory
GB 32 (USB pendrive)
Video playing
Only "video.ts" file (USB root folder)
SYSTEM
Management App
App operating system
Android 6.0 or higher
iOS 13 or higher
FW Update
USB
GENERAL
Powering Vdc 12
Consumption A 1
Operating temperature
ºC 5 ... 40
Relative humidity
% 80 (@30ºC)
Editable parameters
SERVICE NAME, NETWORK NAME, PROVIDER NAME, TS ID, NETWORK ID, ORIGINAL NET ID, LCN, NIT VERSION, PRIVATE DATA, País
(*) Televes does not guarantee 100% compatibility with all USB devices; using high-quality USB devices is recommended.