SMATV optical receiver equipped with Return Path transmitter 1200...1600 nm, Return: 1310 nm, Po 3 dBm

They receive an optical signal in the 1200 nm-1600 nm range to restore the original RF signal transformed by a transmitter.
The RF band is compatible with SMATV (87 MHz - 2400 MHz).
Equipped with a Return Path transmitter (1 MHz - 65 MHz) in the 1310 nm range, with 3 dBm optical power.
Perfect for RFoG / RF Overlay solutions.

Ref. 2336

Codes

Generate PDF

EAN13: 8424450147610

SKU

2336

Televes reserves the right to modify the product

Highlights

Wide reception optical range
Output level above 90 dBµV
Optical power LED indicators
The output band includes SAT, up to 2400 MHz
Optical power drop alarm

Main features

Perfect for RF overlay solutions
Very low equivalent noise conversion
Adjustable attenuator
Easy to install and use
High energy efficiency
SC/APC optical connectors, and F-type connectors for RF

RF Input/Output	Frequency range	Forward channel	MHz	87 - 2400
		Return channel		1 - 65
	Maximum Output Level for CSO and CTB >= 60dB	87-862 MHz	dBμV/ dBmV	93 / 33
		950-2400 MHz		90 / 30
	Output level regulation margin (in 2 dB steps)		dB	0 - 18
	Maximum input level return path		dBμV/ dBmV	95 / 35
	Equivalent input noise of the return channel, measured at 30 MHz and the transmitter output connected directly to the receiver		dBm/Hz	-152,5
	Flatness		dB	± 1,5
	Return losses		dB	>= 11
	Impedance		ohm	75
Optical input (forward channel))	Optical device		type	InGaAs Pin Photodiode
	LWavelength		nm	1200 -1600
	Detection bandwidth		MHz	1 - 3000
	Maximum Optical power received		mW/dBm	4 / 6
Optical output (return channel)	Laser		type	Fabry-Perot
	Wavelength		nm	1310 ± 20
	Maximum output power		mW/dBm	2 / 3
General	Powering/Consumption	12 Vdc	mA	355
		24 Vdc		175
	RF connectors		type	female F
	Optical connectors			SC/APC
	Operating temperature		ºC ºF	-5 ··· +45 +23 ... +113