1-output YEDFA optical amplifier with WDM 1550 nm, Po 19dBm
The module amplifies the 1550 nm optical signal producing an optical output
power of 19dBm.
Equipped with WDM, it has one 1310 nm/1490 nm-input that multiplex
the amplified 1550 nm-signal, providing one 1310 nm/1490 nm/1550
nm-output to be used in a GPON headend (usually OLT512).
Based on YEDFA (Erbium and ytterbium doped fiber) technology, it provides a high gain, a higher optical power, and a low noise factor.
Based on YEDFA (Erbium and ytterbium doped fiber) technology, it provides a high gain, a higher optical power, and a low noise factor.
Ref. 234221
EAN13:
8424450187302
SKU
234221

Televes reserves the right to modify the product
Highlights
- Equipped with WDM for the multiplexing of RF Overlay with GPON signals
- -10 dBm to +10 dBm input range
- Status LED indicators
Main features
- Optical amplification for the RF service over fiber (RF Overlay) on GPON networks
- Suitable for long distances
- SC/APC connectors
Optical | Number of ports | 1 RF Overlay @ Optical IN 1 GPON @ Optical DATA 1 (GPON + RF Overlay) @ Optical OUT (COM) | |
Operating wavelength | nm | 1310 ± 20 @ Upstream 1490 ± 20 @ Downstream 1530 ... 1565 @ RF Overlay | |
Input RF overlay | dBm | -10 ... +10 | |
Output power RF overlay | dBm | 19 | |
Noise figure | dB | 5 (Pin= 0 dBm @ 1550 nm) | |
Insertion loss (1310 & 1490nm) | dB | <1 | |
Return loss | dB | >40 | |
C/N | dB | 51 | |
CSO | dB | >65 | |
CTB | dB | >65 | |
General | Power supply voltage | Vdc | 24 |
Max. current consumption | mA~ | 250 | |
Max. power consumption | W | 6 | |
Optical connector | Type | SC/APC | |
Operating temperature | ÂșC / ÂșF | -5 ... + 45 / + 23 ... + 113 | |
IP code | IP | 20 |