Lower section pivoting, Zinc + Painting 550 tower
The section is painted red (RAL 3020).
Guy wires are required for pivoting sections.
- Anchoring system with union nuts
- 550 tower maximum height: 140m (as per calculation conditions)
- Zinc coating + colour paint: oven-lacquering with polyester electrostatic powder
| Surface facing the wind | m² | 0.845 |
|---|
Physical data
Net weight: 97,000 g
Gross weight: 97,000 g
Width: 620 mm
Height: 3,200 mm
Depth: 536 mm
Main product weight: 95,786 g
Packing
Unit 1 Units
| tlv_reflog | TFUSS550 | |||
|---|---|---|---|---|
| tlv_tabla_especificaciones |
|
|||
| tlv_ean | 8424450150207 | |||
| tlv_dim_product_x | 620 | |||
| tlv_dim_product_x_label | Width | |||
| tlv_dim_product_x_unit | mm | |||
| tlv_dim_product_y | 3,200 | |||
| tlv_dim_product_y_label | Height | |||
| tlv_dim_product_y_unit | mm | |||
| tlv_dim_product_z | 536 | |||
| tlv_dim_product_z_label | Depth | |||
| tlv_dim_product_z_unit | mm | |||
| tlv_weight_product_label | Main product weight | |||
| tlv_weight_product | 95,786 | |||
| tlv_weight_product_unit | g | |||
| tlv_gross_weight_label | Gross weight | |||
| tlv_gross_weight | 97,000 | |||
| tlv_gross_weight_unit | g | |||
| tlv_net_weight_label | Net weight | |||
| tlv_net_weight_unit | g | |||
| tlv_net_weight | 97,000 | |||
| tlv_1_type_pack | Unit | |||
| tlv_1_type_pcs_pack | Units | |||
| tlv_1_pcs_pack | 1 |
Mounting details
It consists in fixing the lower section to the base, set it in upright position and levelling it. The subsequent Middle Sections are then mounted, equipped with the appropriate guy wires; the mounting is carried out by climbing on the previously mounted sections and hoisting the new section with the help of the appropriate lifting tools.