1-output EDFA optical amplifier 1550 nm, Po 20 dBm

The module amplifies the 1550 nm optical signal producing an optical output power of 20 dBm. Based on EDFA (erbium doped fiber) technology, it provides a high gain and a low noise factor.

Ref. 234220

Codes

Generate PDF

EAN13: 8424450154984

SKU

234220

Televes reserves the right to modify the product

Highlights

-10 dBm to +10 dBm input range
Status LED indicators

Main features

Optical amplification for the RF service over fiber (RF Overlay)
Suitable for long distances
SC/APC connectors

Optical bandwidth	nm	1550 ±15
Input optical power	dBm	-10 ... +10
Output optical power	dBm	20 ±0.8
Noise figure	dB	< 5
Return losses	dB	> 50
C/N	dB	> 53
CSO - CENELEC 42 CH	dBc	> 61
CTB - CENELEC 42 CH	dBc	> 61
Powering	V=	24 ±5%
Max. current consumpt	mA	300 @24V=
Optical connectors	Type	SC/APC
Operating temperature	ºC ºF	-5 ... +45 +23 ... +113
Protection index	IP	20

How many T.0X modules can I install in my housing and frames?

Thanks to these measures and graphics, you will be able to know how many modules you can fit in each cabinet or frame. Televes uses standard dimensions in order to make installation easier for our technicians. These dimensions are taken from a Eurocard (standard European format for PCB). Vertically, we find the U (Unit Rack) equivalent to 1.75 inches (44.45 mm), horizontally we have the HP (Horizontal Pitch), equivalent to 0.2 inches (5.08 mm).

Below you will find the dimensions of the main modules in our headend series.

Supports and Cabinets		HP
5301	19’’ Rack frame	84
567201	19’’ Wall support	54
5072	Lockable Cabinet 498mm	84
5069	Lockable Cabinet 648mm	112
5235	Lockable Cabinet 948mm	168

Equipment dimensions’ list		HP
5629 549812	Power Supply Unit (T.0X/T.12)	14
-	T.0X (Transmodulators, CDC,... normal chassis equipment)	10
-	T.12	7
5673	T.0X Blank Plate	10
507312	T.12/T.05 Blank Plate	7

Optical fibre		HP
234220	T.0X EDFA	14
2337 2339	T.0X Splitter 2D/4D	10
234401 234501 234601	T.0X Splitter 8D/16D/32D	18
234228	T.0X EDFA 1E/8S	22