The wishlist name can't be left blank
Middle Section, Zinc + RCP 360 tower

Middle Section, Zinc + RCP 360 tower

Upper section, Zinc + RCP 360 tower

3 m upper section for the erection of a 360 series tower.

Ref. 3085
Generate PDF
EAN13: 8424450136652
  • Anchoring system with union nuts
  • Fully automated soldering
  • 360 tower maximum height: 57 m (as per calculation conditions)

Main features
  • Zinc coating + RCP
  • Grey finish
  • Mast max. diameter: 52 mm

Surface facing the wind0.4

The most appropriate tower model depends on a series of factors: 1. The material you want to install (weight, dimensions) 2. The height at which you want to mount it. 3. The wind speed it will have to withstand. 4. The location of the tower (hill, balcony, etc.). Based on these parameters, you may have to install M180, M360, M450, or M550.
All of our towers have the shape of equilateral triangles. The name corresponds to the dimensions of the tower side (18 cm, 36 cm, 45 cm, or 55 cm).
All upper sections from Televes allow mast diameters of up to 45 mm.
Protective reactive coating. It extends the durability of the zinc coating.

Mounting details

It consists in fixing the lower section to the base, set it in upright position and levelling it. The subsequent Middle Sections are then mounted, equipped with the appropriate guy wires; the mounting is carried out by climbing on the previously mounted sections and hoisting the new section with the help of the appropriate lifting tools.