The wishlist name can't be left blank

IFmix series mast amplifier (4 outputs) 2 inputs: UHF/VHFmix-SATmix

Masthead amplifier for the amplification and combination of terrestrial and satellite television signals coming from several antennas.
Equipped with 2 inputs with UHF-band amplification, together with VHF and SAT combination. The resulting signal is available on 4 identical outputs for further distribution.
Allows DC pass towards the satellite input to power the LNB.
The amplifier is powered with in the 12 Vdc-to-24 Vdc range through one of the output coaxial cables.

Ref. 5354
Product Sheet
EAN13: 8424450053546
SKU
5354
Highlights
  • Up to 4 outputs
  • EasyF connection system
  • Fully automated manufacturing, subject to the most stringent quality controls
  • DC pass towards the UHF input to power a BOSS system, and towards the SAT input to power the LNB
  • Easy mounting. Equipped with a plastic tie for mast mounting
  • Resistant ABS-plastic case for outdoor installation

Discover

EasyF connection system: simplicity and savings

EasyF is an innovative connection concept where the inner conductor of the coaxial cable is directly inserted in the device, thus improving connection reliability. Thanks to the absence of F connectors, the chassis can be reduced and the connection of two cables secured with a a single screw.

  • Real time savings: speeding the installation is possible without the need for coaxial cable termination. Furthermore, there is no need for screwing the connectors on the device, which is sometimes difficult when there is little room
  • Connection reliability: the clamp holding the cables prevents the coaxial cable to come off
  • Cost savings: no additional connectors are required (neither F nor IEC)
  • Space optimization: inputs and outputs are always on the same side of the device to prevent coaxial cables from bending, and to make working inside cabinets and register boxes easier
  • Very easy three-step mounting: only screwing and unscrewing the covers is required to connect both cables:

1. Unscrew the device's cover to access the connection

2. Insert the previously stripped coaxial cables

3. Close the cover and screw to ensure connection

Learn more about EasyF system reliability

With EasyF, the connection between the coaxial cable and the device is carried out using an automated system for contact insertion of the inner conductor, without any soldering.

  • Always as new: the device's operating life increases when the factor of solder wearing out with time is removed
  • Failure rate reduction: usually produced as a result of cold soldering joints
  • Electromagnetic behaviour optimization: for high frequencies
  • Our commitment with environment is reinforced: pollution caused by the welding process is eliminated and production power consumption is reduced

Bands
VHFUHFSAT
Frequency rangeMHz
47 ... 254470 ... 862950 ... 2200
GaindB
-9 20 -12
Gain adjustment rangedB
--0 ... 15--
Output level DIN45004BdBµV
--93 --
Noise figuredB
--2.5 --
Number of inputs3
Inputs/Bands
VHFUHFSAT
Max current inputmA
0 40 --
Max current for LNBmA
----350
PoweringVdc 12 ... 24
Current consumptionmA40
Protection index (IP)23
Operating temperature°C -5 ... 45

Physical data

Net weight: 362 g

Gross weight: 362 g

Width: 126 mm

Height: 136 mm

Depth: 40 mm

Main product weight: 362 g

Packing

Box 1 Units

Carton 5 Units

Bucket 60 Units

More Information
tlv_tags

EasyF connection system: simplicity and savings

EasyF is an innovative connection concept where the inner conductor of the coaxial cable is directly inserted in the device, thus improving connection reliability. Thanks to the absence of F connectors, the chassis can be reduced and the connection of two cables secured with a a single screw.

  • Real time savings: speeding the installation is possible without the need for coaxial cable termination. Furthermore, there is no need for screwing the connectors on the device, which is sometimes difficult when there is little room
  • Connection reliability: the clamp holding the cables prevents the coaxial cable to come off
  • Cost savings: no additional connectors are required (neither F nor IEC)
  • Space optimization: inputs and outputs are always on the same side of the device to prevent coaxial cables from bending, and to make working inside cabinets and register boxes easier
  • Very easy three-step mounting: only screwing and unscrewing the covers is required to connect both cables:

1. Unscrew the device's cover to access the connection

2. Insert the previously stripped coaxial cables

3. Close the cover and screw to ensure connection

Learn more about EasyF system reliability

With EasyF, the connection between the coaxial cable and the device is carried out using an automated system for contact insertion of the inner conductor, without any soldering.

  • Always as new: the device's operating life increases when the factor of solder wearing out with time is removed
  • Failure rate reduction: usually produced as a result of cold soldering joints
  • Electromagnetic behaviour optimization: for high frequencies
  • Our commitment with environment is reinforced: pollution caused by the welding process is eliminated and production power consumption is reduced
tlv_tabla_especificaciones
Bands
VHFUHFSAT
Frequency rangeMHz
47 ... 254470 ... 862950 ... 2200
GaindB
-9 20 -12
Gain adjustment rangedB
--0 ... 15--
Output level DIN45004BdBµV
--93 --
Noise figuredB
--2.5 --
Number of inputs3
Inputs/Bands
VHFUHFSAT
Max current inputmA
0 40 --
Max current for LNBmA
----350
PoweringVdc 12 ... 24
Current consumptionmA40
Protection index (IP)23
Operating temperature°C -5 ... 45
tlv_diferencias Orange colour
tlv_ean 8424450053546
tlv_dim_product_x 126
tlv_dim_product_x_label Width
tlv_dim_product_x_unit mm
tlv_dim_product_y 136
tlv_dim_product_y_label Height
tlv_dim_product_y_unit mm
tlv_dim_product_z 40
tlv_dim_product_z_label Depth
tlv_dim_product_z_unit mm
tlv_weight_product_label Main product weight
tlv_weight_product 362
tlv_weight_product_unit g
tlv_gross_weight_label Gross weight
tlv_gross_weight 362
tlv_gross_weight_unit g
tlv_net_weight_label Net weight
tlv_net_weight_unit g
tlv_net_weight 362
tlv_1_type_pack Box
tlv_1_type_pcs_pack Units
tlv_1_pcs_pack 1
tlv_2_pcs_pack 5
tlv_2_type_pack Carton
tlv_2_type_pcs_pack Units
tlv_3_pcs_pack 60
tlv_3_type_pack Bucket
tlv_3_type_pcs_pack Units

Assembly and advantages of EASYF connection system