The wishlist name can't be left blank
MiniKom EasyF broadband multiband amplifier 5 inputs: FM-VHF-UHF-21..35-39..48

MiniKom EasyF broadband multiband amplifier 5 inputs: FM-VHF-UHF-21..35-39..48

MiniKom EasyF broadband multiband amplifier 4 inputs: FM-VHF-UHF-UHF

MiniKom EasyF broadband multiband amplifier 4 inputs: FM-VHF-UHF-UHF

MiniKom EasyF broadband multiband amplifier 5 inputs: FM-VHF-UHF-21..32-36..48

Configurable headend multiband amplifier for MATV systems with separate amplification that guarantees the absence of intermodulation among inputs.
Equipped with 5 inputs: FM-VHF-UHF-21...32-34....48. The UHF band is divided in 2 of the inputs, which is useful in two-repeater reception installations since it allows an appropriate filtering of the channels for each of them. The VHF and UHF inputs have both selectable gain margins, whereas the FM input has a single amplifying stage.
Equipped with a LTE700 filter, and an output LED signal indicator for immediate network failure detection.

Ref. 562325
Product Sheet
EAN13: 8424450273258
SKU
562325
Highlights
  • Very compact size (103 mm x 103 mm x 50 mm)
  • LED indicators to display the presence of both output signal and power supply
  • Switched configurable gain (high/low), and high output level
  • Two amplifying stages for TV bands
  • Switch-mode power supply ensuring low power consumption
  • EasyF connection system
  • High-screening Zamak chassis

Main features
  • Test output (-30 dB)
  • Intuitive front cover, including adjustments and block diagram
  • ON/OFF DC pass switch on VHF and UHF inputs for pre-amplifier or BOSS system powering
  • Can be wall-mounted using screws

Discover

EasyF connection system: simplicity and savings

EasyF is an innovative connection concept where the inner conductor of the coaxial cable is directly inserted in the device, thus improving connection reliability. Thanks to the absence of F connectors, the chassis can be reduced and the connection of two cables secured with a a single screw.

  • Real time savings: speeding the installation is possible without the need for coaxial cable termination. Furthermore, there is no need for screwing the connectors on the device, which is sometimes difficult when there is little room
  • Connection reliability: the clamp holding the cables prevents the coaxial cable to come off
  • Cost savings: no additional connectors are required (neither F nor IEC)
  • Space optimization: inputs and outputs are always on the same side of the device to prevent coaxial cables from bending, and to make working inside cabinets and register boxes easier
  • Very easy three-step mounting: only screwing and unscrewing the covers is required to connect both cables:

1. Unscrew the device's cover to access the connection

2. Insert the previously stripped coaxial cables

3. Close the cover and screw to ensure connection

Learn more about EasyF system reliability

With EasyF, the connection between the coaxial cable and the device is carried out using an automated system for contact insertion of the inner conductor, without any soldering.

  • Always as new: the device's operating life increases when the factor of solder wearing out with time is removed
  • Failure rate reduction: usually produced as a result of cold soldering joints
  • Electromagnetic behaviour optimization: for high frequencies
  • Our commitment with environment is reinforced: pollution caused by the welding process is eliminated and production power consumption is reduced

Bands UHF BV BIV VHF FM
Frequency margin MHz 470...694 574...694 470...550 174...400 88...108
Gain 0 dB 36 35 34 34 15
10 26 25 24 24
Gain adjustment range Manual
0 ... 20
Manual
0 ... 20
Manual
0 ... 20
Manual
0 ... 20
Manual
0 ... 20
Max. output level IMD3 (2ch, -35dB)
dBμV 123 123
123 121
120
DIN 45004B
116
116
116
114
113
IMD3 (2ch, -60dB) 113
113
113
111
-
IMD2 (2ch, -60dB) -
-
- 103
-
Noise figure dB 10 10 10 5
6
Test -30
Power supply inputs V 12 12 12 12 -
Max. current through inputs mA 200 200 200 200 -
400 max.
Mains voltage / frequency V~ /Hz 220 - 230 / 50-60
Total AC consumption (without input powering) OFF W, mA 4.6 / 55
Total AC consumption (with input powering) ON W, mA  10.5 / 110
Protection index IP 20
Operating temperature range ºC -5 ... +45

Physical data

Net weight: 620 g

Gross weight: 620 g

Packing

Box 1 Units

More Information
tlv_tags

EasyF connection system: simplicity and savings

EasyF is an innovative connection concept where the inner conductor of the coaxial cable is directly inserted in the device, thus improving connection reliability. Thanks to the absence of F connectors, the chassis can be reduced and the connection of two cables secured with a a single screw.

  • Real time savings: speeding the installation is possible without the need for coaxial cable termination. Furthermore, there is no need for screwing the connectors on the device, which is sometimes difficult when there is little room
  • Connection reliability: the clamp holding the cables prevents the coaxial cable to come off
  • Cost savings: no additional connectors are required (neither F nor IEC)
  • Space optimization: inputs and outputs are always on the same side of the device to prevent coaxial cables from bending, and to make working inside cabinets and register boxes easier
  • Very easy three-step mounting: only screwing and unscrewing the covers is required to connect both cables:

1. Unscrew the device's cover to access the connection

2. Insert the previously stripped coaxial cables

3. Close the cover and screw to ensure connection

Learn more about EasyF system reliability

With EasyF, the connection between the coaxial cable and the device is carried out using an automated system for contact insertion of the inner conductor, without any soldering.

  • Always as new: the device's operating life increases when the factor of solder wearing out with time is removed
  • Failure rate reduction: usually produced as a result of cold soldering joints
  • Electromagnetic behaviour optimization: for high frequencies
  • Our commitment with environment is reinforced: pollution caused by the welding process is eliminated and production power consumption is reduced
tlv_reflog MVNF540DD2
tlv_tabla_especificaciones
Bands UHF BV BIV VHF FM
Frequency margin MHz 470...694 574...694 470...550 174...400 88...108
Gain 0 dB 36 35 34 34 15
10 26 25 24 24
Gain adjustment range Manual
0 ... 20
Manual
0 ... 20
Manual
0 ... 20
Manual
0 ... 20
Manual
0 ... 20
Max. output level IMD3 (2ch, -35dB)
dBμV 123 123
123 121
120
DIN 45004B
116
116
116
114
113
IMD3 (2ch, -60dB) 113
113
113
111
-
IMD2 (2ch, -60dB) -
-
- 103
-
Noise figure dB 10 10 10 5
6
Test -30
Power supply inputs V 12 12 12 12 -
Max. current through inputs mA 200 200 200 200 -
400 max.
Mains voltage / frequency V~ /Hz 220 - 230 / 50-60
Total AC consumption (without input powering) OFF W, mA 4.6 / 55
Total AC consumption (with input powering) ON W, mA  10.5 / 110
Protection index IP 20
Operating temperature range ºC -5 ... +45
tlv_ean 8424450273258
tlv_dim_product_x 0
tlv_dim_product_x_label Width
tlv_dim_product_x_unit mm
tlv_dim_product_y 0
tlv_dim_product_y_label Height
tlv_dim_product_y_unit mm
tlv_dim_product_z 0
tlv_dim_product_z_label Depth
tlv_dim_product_z_unit mm
tlv_weight_product_label Main product weight
tlv_weight_product_unit Array
tlv_gross_weight_label Gross weight
tlv_gross_weight 620
tlv_gross_weight_unit g
tlv_net_weight_label Net weight
tlv_net_weight_unit g
tlv_net_weight 620
tlv_1_type_pack Box
tlv_1_type_pcs_pack Units
tlv_1_pcs_pack 1

Assembly and advantages of EASYF connection system