Boom accesory with vertical mast Ø32mm, Hot-dip galvanised for 450/550 tower
Accessory for the installation of climate sensors along the 450 and 550 series towers.
Designed to allow the placement of sensors at an optimum height and position, it consists of a horizontal arm that separates the sensor installation area 3 000 mm from the centre of the tower.
At the end of this horizontal arm is a vertical element that raises the sensor installation point to 850 mm.
This vertical element has a diameter of 32 mm.
This arrangement separates the measuring elements from the tower axis. This minimises the turbulence and disturbances that the structure itself could generate, ensuring more accurate and reliable readings.
- The hot-dip galvanised surface treatment offers increased durability in adverse corrosion conditions.
- High rigidity and mechanical strength
- Allows anchoring along the tower with a clamp, ensuring fast and secure installation
- Keeps sensors separate from the tower to reduce turbulence
- Has a jib as a secondary support on the tower for increased stability
Physical data
Net weight: 25,000 g
Gross weight: 25,000 g
Width: 3,044 mm
Height: 150 mm
Depth: 214 mm
Main product weight: 25,000 g
Packing
Film 1 Units
| tlv_discontinued | No |
|---|---|
| tlv_reflog | BOOM32 |
| tlv_ean | 8424450330227 |
| tlv_dim_product_x | 3,044 |
| tlv_dim_product_x_label | Width |
| tlv_dim_product_x_unit | mm |
| tlv_dim_product_y | 150 |
| tlv_dim_product_y_label | Height |
| tlv_dim_product_y_unit | mm |
| tlv_dim_product_z | 214 |
| tlv_dim_product_z_label | Depth |
| tlv_dim_product_z_unit | mm |
| tlv_weight_product_label | Main product weight |
| tlv_weight_product | 25,000 |
| tlv_weight_product_unit | g |
| tlv_gross_weight_label | Gross weight |
| tlv_gross_weight | 25,000 |
| tlv_gross_weight_unit | g |
| tlv_net_weight_label | Net weight |
| tlv_net_weight_unit | g |
| tlv_net_weight | 25,000 |
| tlv_1_type_pack | Film |
| tlv_1_type_pcs_pack | Units |
| tlv_1_pcs_pack | 1 |