HR (High Rejection) LTE/5G filter 47...694 MHz (Ch.48), "EasyF" connection
- Low insertion losses to avoid any impacts on the distributed signals
- EasyF system: easy, quick and safe connectorization
- Ultra-small ergonomic design
- Fully automated manufacturing, subject to the most stringent quality controls
- High-screening Zamak chassis
- Resistant ABS-plastic case for outdoor installation
- Orange colour
EasyF connection system: simplicity and savings
EasyF is an innovative connection concept where the inner conductor of the coaxial cable is directly inserted in the device, thus improving connection reliability. Thanks to the absence of F connectors, the chassis can be reduced and the connection of two cables secured with a a single screw.
- Real time savings: speeding the installation is possible without the need for coaxial cable termination. Furthermore, there is no need for screwing the connectors on the device, which is sometimes difficult when there is little room
- Connection reliability: the clamp holding the cables prevents the coaxial cable to come off
- Cost savings: no additional connectors are required (neither F nor IEC)
- Space optimization: inputs and outputs are always on the same side of the device to prevent coaxial cables from bending, and to make working inside cabinets and register boxes easier
- Very easy three-step mounting: only screwing and unscrewing the covers is required to connect both cables:
1. Unscrew the device's cover to access the connection
2. Insert the previously stripped coaxial cables
3. Close the cover and screw to ensure connection
Learn more about EasyF system reliability
With EasyF, the connection between the coaxial cable and the device is carried out using an automated system for contact insertion of the inner conductor, without any soldering.
- Always as new: the device's operating life increases when the factor of solder wearing out with time is removed
- Failure rate reduction: usually produced as a result of cold soldering joints
- Electromagnetic behaviour optimization: for high frequencies
- Our commitment with environment is reinforced: pollution caused by the welding process is eliminated and production power consumption is reduced
Rejected band | MHz | 733 ... 862 |
---|---|---|
Rejected band attenuation | dB | > 25 |
Pass band | MHz | 47 ... 694 |
Pass band attenuation | dB | 1 |
Number of inputs | 1 | |
Number of outputs | 1 | |
Connectors | "EasyF" type | |
Operating temperature | °C | -5 ... 45 |
Protection index | 23 |
Physical data
Net weight: 197 g
Gross weight: 197 g
Width: 88 mm
Height: 76 mm
Depth: 42 mm
Main product weight: 197 g
Packing
Box 1 Units
Carton 10 Units
tlv_tags | EasyF connection system: simplicity and savings
EasyF is an innovative connection concept where the inner conductor of the coaxial cable is directly inserted in the device, thus improving connection reliability. Thanks to the absence of F connectors, the chassis can be reduced and the connection of two cables secured with a a single screw.
1. Unscrew the device's cover to access the connection 2. Insert the previously stripped coaxial cables 3. Close the cover and screw to ensure connection Learn more about EasyF system reliabilityWith EasyF, the connection between the coaxial cable and the device is carried out using an automated system for contact insertion of the inner conductor, without any soldering.
|
|||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
tlv_reflog | TSKM48LTE | |||||||||||||||||||||||||||
tlv_tabla_especificaciones |
|
|||||||||||||||||||||||||||
tlv_ean | 8424450186015 | |||||||||||||||||||||||||||
tlv_dim_product_x | 88 | |||||||||||||||||||||||||||
tlv_dim_product_x_label | Width | |||||||||||||||||||||||||||
tlv_dim_product_x_unit | mm | |||||||||||||||||||||||||||
tlv_dim_product_y | 76 | |||||||||||||||||||||||||||
tlv_dim_product_y_label | Height | |||||||||||||||||||||||||||
tlv_dim_product_y_unit | mm | |||||||||||||||||||||||||||
tlv_dim_product_z | 42 | |||||||||||||||||||||||||||
tlv_dim_product_z_label | Depth | |||||||||||||||||||||||||||
tlv_dim_product_z_unit | mm | |||||||||||||||||||||||||||
tlv_weight_product_label | Main product weight | |||||||||||||||||||||||||||
tlv_weight_product | 197 | |||||||||||||||||||||||||||
tlv_weight_product_unit | g | |||||||||||||||||||||||||||
tlv_gross_weight_label | Gross weight | |||||||||||||||||||||||||||
tlv_gross_weight | 197 | |||||||||||||||||||||||||||
tlv_gross_weight_unit | g | |||||||||||||||||||||||||||
tlv_net_weight_label | Net weight | |||||||||||||||||||||||||||
tlv_net_weight_unit | g | |||||||||||||||||||||||||||
tlv_net_weight | 197 | |||||||||||||||||||||||||||
tlv_1_type_pack | Box | |||||||||||||||||||||||||||
tlv_1_type_pcs_pack | Units | |||||||||||||||||||||||||||
tlv_1_pcs_pack | 1 | |||||||||||||||||||||||||||
tlv_2_pcs_pack | 10 | |||||||||||||||||||||||||||
tlv_2_type_pack | Carton | |||||||||||||||||||||||||||
tlv_2_type_pcs_pack | Units |
-
Product release brochure
FiltrosLTE700_403201_405201_EN_[PLA09170000].pdf
(1.11 MB) -
AutoCAD drawing
405202- FILTRO_EasyF_21_48_10_Sin_CAD07190077.dwg
(0.16 MB) -
Declaration of Conformity
DOC01220082_0_405202.pdf
(0.21 MB) -
Data sheet
DS10190009_001_ES-EN-FR-IT-DE-SV-FI-PL-RU-PT_405202_405203.pdf
(1.55 MB) -
Technical specifications
technical_specifications_en_US_TEC07210107_405202.pdf
(0.11 MB) -
Product Sheet
405202_en_US_product_sheet_PSH01231676_405202.pdf
(0.08 MB) -
Brochure
F_NewProduct_2017_CAI_EN_[BRO12170000].pdf
(6.4 MB) -
Brochure
F_guia_LTE_TUK_19_[BRO05190000].pdf
(4.89 MB)