RF Amplifier
Televes reserves the right to modify the product
- Low second and third order distortion, which provide a high output voltage (typical values around 126 dBμV)
- Equipped with two signal inputs, which allow the mixing of the channels of its own headend with channels coming from other sources
- Equipped with a test output
RF INPUT |
Frequency range | MHz | 47...1006 | |
Return losses | dB | > 10 | ||
Impedance | Ω | 75 | ||
RF OUTPUT |
Frequency range | MHz | 47...1006 | |
Gain | dB | 44 ± 2,5 | ||
Max. output level | DIN45004B | dBμV (dBmV) |
126 (66) | |
42 CH Cenelec | ||||
Gain regulation | dB | 0 - 20 | ||
Return losses | > 10 | |||
Impedance | Ω | 75 | ||
GENERAL | Powering voltage | Vdc | 24 | |
Consumption (max.) | mA | 450 | ||
Protection index |
IP | 20 | ||
Operating temperature |
ºC | 0...45 |
In some cases, the transmodulation of specific satellite channels into COFDM will probably not be enough; this is why the option is available to add the IF of a satellite polarity to the COFDM signal flow. Furthermore, that signal flow may be transmitted over optical fibre by means of an appropriate low-loss optical transmitter, thus allowing to reach longer distances.
1. T.0X processing headends (DVB/S2-COFDM and DVB-T/COFDM transmodulators, encoders/modulators, amplifier, etc.).
2. MiniKom amplifier ref. 5363 (Art. No. EV45).
3. SMATV optical transmitter ref. 238201 (Art. No. OMS1310).
4. SMATV optical receiver ref. 2311 (Art. No. OE1216)
-
Data sheet
DS06170592_004_ES-EN-FR-IT-PL-RU-PT_5575.pdf
(0.37 MB) -
AutoCAD drawing
5575 - T0X_AMPL_47_862_G44dB_10_Sin_[CAD07180119].dwg
(0.09 MB) -
AutoCAD drawing
5575_CAD02230197.dwg
(0.29 MB) -
Declaration of Conformity
DOC12160359_0_5575.pdf
(0.21 MB) -
Product Sheet
5575_en_US_product_sheet_PSH01230776.pdf
(0.1 MB)