AVANT 6 programmable multiband amplifier for terrestrial signals, with 20 digital programmable filters
The multiband amplifier is equipped with 4 inputs: FM-DAB-2xVHF/UHF, and can achieve programmable amplification and balancing of the different RF inputs.
Thanks to ASuite, the multiband amplifier programming is very easy and intuitive using an Android or Windows/Mac application.
The multiband amplifier is able to detect LTE signals and automatically set the filter to channel 48 (LTE700).
RED compliant
Televes reserves the right to modify the product
- Digital processing technology implemented on terrestrial TV signals
- Up to 20 individually programmable filters: single channel digital filtering
- Automatic signal adjustment in each filter (AGC): and output signal manual regulation
- UHF/VHF digital filters with high selectivity: 30dB rejection (@ 1MHz)
- SAW filters (Surface Acoustic Wave) against LTE interferences, with the best selectivity and stability
- Compatible with DVB-T and DVB-T2
- TForce Technology: terrestrial signal level always stable and adapted to its optimum value
- Storage of several setups and cloning
- Zamak chassis provides high screening effect
- Light-weight and compact multiband amplifier with a wide range of features (225x120x55mm)
- Low power consumption: 8W
- Very easy configuration and adjustment using ASuite application for Android or Windows/Mac
- VHF+UHF inputs: the output level is programmable between 77-102dBμV (VHF) or 80-105dBµV (UHF)
- DAB input: the output level is programmable between 77-102dBμV. When it is used, the other inputs are available only for UHF band (in addition to the specific FM input)
- The FM input can be enabled or not. In case this input is enabled, it will be amplified and its output level set to 10 dB below the lowest-level UHF channel (taking into account the equalization slope)
- Automatic balancing according to the programmed output level and equalization slope
- Allocation of filters to inputs without restraints
- Powering of pre-amplifiers or BOSS system
- LED indicators displaying both unit and signal statuses
- Easy-to-replace power supply
| Number of inputs | 4 | ||||
|---|---|---|---|---|---|
| Number of outputs | 1 | ||||
| Bands |
| ||||
| Frequency range | MHz |
| |||
| Number of filters |
| ||||
| Channels per filter |
| ||||
| Gain | dB |
| |||
| Gain adjustment range | dB |
| |||
| Manual regulation after auto-adjustment | dB |
| |||
| Slope regulation | dB |
| |||
| Input level | dBμV |
| |||
| Output level DIN45004B | dBμV |
| |||
| Output level EN50083 | dBμV |
| |||
| Programmable output level | dBμV |
| |||
| Noise figure | dB |
| |||
| Selectivity | dB |
| |||
| Powering per inputs | Vdc |
| |||
| Input voltage | Vac | 220 ... 230 | |||
| Mains frequency | 50 Hz / 60 Hz | ||||
| Max. current | mA | 90 | |||
| Max. power consumption | W | 8 | |||
| Protection index (IP) | 20 | ||||
| Operating temperature | °C | -5 ... 45 |
-
Data sheet
DS05210004_000_ES-EN-FR-PL-RU-PT_532603.pdf
(3.05 MB) -
Declaration of Conformity
DOC04220001_0_532603.pdf
(0.21 MB) -
AutoCAD drawing
532603_CAD02230097.dwg
(0.55 MB) -
Product Sheet
532603_en_US_product_sheet_PSH01232064.pdf
(0.13 MB) -
Technical specifications
technical_specifications_en_US_TEC02220017_532603.pdf
(0.11 MB)
